우리의 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Oracle 1z0-593시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump는 여러분이 한번에Oracle 1z0-593인증시험을 패스함을 보장 드립니다.
근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. Oracle인증 1z0-593시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이Oracle인증 1z0-593시험을 한방에 패스하도록 실제시험문제에 대비한Oracle인증 1z0-593덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
시험 번호/코드: 1z0-593
시험 이름: Oracle (Oracle Real Application Clusters 11g Essentials)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-04-20
ITExamDump의Oracle인증 1z0-593덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의Oracle인증 1z0-593덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.
IT인증자격증만 소지한다면 일상생활에서 많은 도움이 될것입니다. 하지만 문제는 어떻게 간단하게 시험을 패스할것인가 입니다. ITExamDump는 IT전문가들이 제공한 시험관련 최신 연구자료들을 제공해드립니다.ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다. ITExamDump의Oracle 인증1z0-593시험대비 덤프로Oracle 인증1z0-593시험을 패스하세요.
우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Oracle 1z0-593관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.
ITExamDump는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. Oracle 1z0-593덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. Oracle 1z0-593덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.
1z0-593 덤프무료샘플다운로드하기: http://www.itexamdump.com/1z0-593.html
NO.1 Choose two options that are not suitable for shared storage in a RAC 11g Release 2 database
created using DBCA.
A. Block device
B. Raw device
C. ASM
D. CFS
Answer: A,B
Oracle 1z0-593자격증 1z0-593 1z0-593시험문제
Explanation:
Before you use DBCA to convert a single-instance database to an Oracle RAC or an
Oracle RAC One Node database, ensure that your system meets the following conditions:
/ It is a supported hardware and operating system software configuration.
/ It has shared storage: either Oracle Cluster File System (CFS) (not D) or Oracle ASM (not C) is
available and accessible from all nodes. On Linux on POWER systems, ensure that GPFS is
available and accessible from all nodes.
/ Your applications have no design characteristics that preclude their use with cluster database
processing.
Note:
*DBCA (Database Configuration Assistant) is a utility used for creating, configuring and removing
Oracle Databases.
Reference:Creating Oracle Real Application Clusters Databases with Database Configuration
Assistant
Reference:Converting to Oracle RAC and Oracle RAC One Node with DBCA
NO.2 The Oracle Cluster Health Monitor can't _________.
A. Detect and analyze OS and duster resource for problems in Oracle Clusterware and RAC cluster
B. Track OS resource consumption at each node, process, and device level continuously
C. Be installed on Windows Server 20O3 SP1
D. Collect and analyze the cluster-wide data
Answer: C
Oracle최신덤프 1z0-593자료 1z0-593 1z0-593 1z0-593덤프 1z0-593 pdf
Explanation:
Incorrect: Oracle Cluster Health Monitoris designed to detect and analyze operating system (OS) and
cluster resource related degradation and failures in order to bring more explanatory power to many
issues that occur in clusters where Oracle Clusterware and Oracle RAC are running such as node
eviction. It continuously tracks the OS resource consumption at each node, process, and device level.
It collects and analyzes this cluster-wide data. In real time mode, when thresholds are hit, an alert is
shown to the operator. For root cause analysis, historical data can be replayed to understand what
was happening at the time of failure.
NO.3 Select two Clusterware administration tasks that must be performed as the root user.
A. List the location of the voting disks.
B. Check the health and viability of the Clusterware on all nodes.
C. Disable the Clusterware from automatic start at node reboot.
D. Start the Clusterware manually on one node.
E. Check the health of the Clusterware on one node.
Answer: A,D
Oracle 1z0-593자격증 1z0-593시험문제 1z0-593덤프
Explanation:
A:Voting disk management requires a valid and working OCR. Before you add, delete, replace, or
restore voting disks, run the ocrcheck command as root.
D: Example:
Restart the Oracle Clusterware stack in normal mode as root:
# crsctl start crs
NO.4 Which of these is not recommended as the basis for an ASM disk in a shared storage
configuration?
A. Raw disk partition
B. NFS file
C. Raw logical volumes
D. iSCSI targets
Answer: A
Oracle 1z0-593 pdf 1z0-593 dump 1z0-593시험문제 1z0-593인증 1z0-593
Explanation:
*Block or raw devices are not supported by Oracle Universal Installer (OUI) or Database
Configuration Assistant (DBCA). However, manually configured raw or block devices are supported
by Oracle, but not recommended.
* Shared disk access requires some sort of networked storage
-
iSCSI (not D)
-
Fibre Channel/SCSI
-
NFS (not B)
*A logical volume issupported in less complicated configurations where a logical volume is mapped
to a LUN, or a logical volume uses disks or raw partitions.
NO.5 Which step will you have to perform on Windows to restore the OCR that you did not do on
Linux?
A. Identify existing backups with the -backup option
B. Use the Service Control Panel to stop services
C. Review the contents of the backup with the ocrdump command
D. Make sure that the restored OCR files are valid
Answer: B
Oracle 1z0-593자격증 1z0-593
Explanation:
See step 2) below. Restoring the Oracle Cluster Registry on Windows-Based Systems
Use the following procedure to restore the OCR on Windows-based systems:
cluvfy comp ocr -n all [-verbose]
Note:
Restoring the Oracle Cluster Registry on UNIX-Based SystemsUse the following procedure to
restore the OCR on UNIX-based systems:
Repeat this command on each node in your Oracle RAC cluster.
Note:
Prior to running the crsctl start crs command in step 4, run the following command to verify that all
processes except init.cssd fatal are inactive:
ps -ef|grep cssd
Repeat this command on each node in your Oracle RAC cluster.
Reference: Oracle Database Oracle Clusterware and Oracle Real Application Clusters
Administration and Deployment Guide
NO.6 Once OUI recognizes a set of nodes in a cluster, which three choices does it offer when
installing the Oracle Database 11g Release 2 software?
A. You can only install the Oracle Database with the RAC option on selected nodes.
B. OUI forcesyouto configure ASM for shared storage before proceeding.
C. You can install the Oracle Database as a single instance or with the RAC option on all the nodes.
D. You can install the Oracle Database as a single instance or with the RAC option on selected nodes.
E. You can install Oracle RAC One Node.
Answer: B,D,E
Oracle pdf 1z0-593 dumps 1z0-593
Explanation:
B, D: Complete the prerequisite tasks for converting to an Oracle RAC database:
Oracle Clusterware and Oracle Database software is installed on all target nodes.
Oracle Clusterware is started.
(D)The Oracle Database binary is enabled for Oracle RAC on all target nodes.
(B) Shared storage is configured and accessible from all nodes.
User equivalency is configured for the operating system user performing the conversion.
Enterprise Manager agents are configured and running on all nodes, and are configured with the
cluster and host information.
The database being converted has been backed up successfully.
E:Installing Oracle RAC One Node is available starting with Oracle Database 11g Release 2
(11.2.0.2).
Note:
*By default, the standard Oracle Database 11g software installation process installs the Oracle
RAC option when OUI recognizes that you are performing the installation on a cluster.
NO.7 Which command lists all the service-related information for the specified service? (crmdb is
the cluster database name and crms is the service name)
A. #crsctl config services -d cmdb -s crms
B. #srvctlconfig service -d cmdb -s crms
C. #srvctl getenv service -d crmdb -s crms
D. #crsctl status service -d crm -s crm -v
Answer: B
Oracle 1z0-593 1z0-593시험문제 1z0-593 1z0-593 1z0-593 pdf
Explanation:
*The srvctl config command displays the Oracle Restart configuration of the specified component or
set of components.
*srvctl config service For the specified database, displays the Oracle Restart configuration
information for the specified database service or for all database services
Incorrect: Not C: getenv
Gets and displays environment variables and their values from the Oracle Restart configuration for a
database, listener, or Oracle ASM instance.
srvctl getenv Summary
CommandDescription
*srvctl getenv asm Displays the configured environment variables for the Oracle ASM instance
*srvctl getenv database Displays the configured environment variables for the specified database
instance
*srvctl getenv listener Displays the configuredenvironment variables for the specified listener
Reference:SRVCTL Command Reference for Oracle Restart
NO.8 Which two options are checked by the Oracle Universal Installer, when you first install Oracle
Software on a system?
A. if the OFA-compliant path is available
B. oraInst.loc should exist
C. that the user running the installation has permissions to write to the designated path
D. that you are running OUI as a DBA user
Answer: A,B
Oracle pdf 1z0-593최신덤프 1z0-593 1z0-593 1z0-593
Explanation:
A:
*When installing an OFA-compliant database using Oracle Universal Installer, ORACLE_BASE is
set to /pm/app/oracle by default.
*All Oracle products on CD-ROM are OFA-compliant; that is, Oracle Universal Installer places
Oracle products in directory locations that follow OFA guidelines
B: Every Oracle software installation has an associated Central Inventory where the details of all the
Oracle products installed on a host are registered. The Central Inventory is located in thedirectory
that the inventory pointer file specifies. Each Oracle software installation has its own Central
Inventory pointer file that is unknown to another Oracle software installation.
Default Inventory Pointer File Locations
PlatformDefault Inventory Pointer Location Linux LinuxPPC /etc/oraInst.loc AIX /etc/oraInst.loc
Solaris SPARC HPUX-IA64 HPUX-PARISC /var/opt/oracle/oraInst.loc Windows Windows.X64
Windows.IA64 HKEY_LOCAL_MACHINE/Software/Oracle/inst.loc
NO.9 You are creating an Oracle Cluster database using DBCA. The "Memory size (SGA and PGA)"
field is supplied on value of 2000 MB. The default Block used for the database is __________.
A. 2 KB
B. 4 KB
C. 8 KB
D. 16 KB
E. 32 KB
Answer: C
Oracle자격증 1z0-593기출문제 1z0-593 1z0-593 dumps 1z0-593 dump
Explanation:
Note: *In the Block Size list, enter the size in bytes or accept the default. Oracle Database data is
stored in these blocks. One data block corresponds to a specific number of bytes of physical space
on disk. While using pre-defined templates, this field is not enabled since the database will be
created with the default block size of 8 KB. But while using the custom option, you can change block
size. Selecting a block size other than the default 8 KB value requires advanced knowledge and
should only be done when absolutely required.
NO.10 Which two actions do you need to take in Oracle Grid Infrastructure 11g Release 2 to enable
debugging for the resource ora.docrac.vip?
A. Make sure you are logged in as a privileged user.
B. crsctldebug res ora.docrac1.vip:1
C. crsctlset log res ora.docrac1.vip:1
D. crsctldebug log res ora.docrac1.vip:0
Answer: A,C
Oracle최신덤프 1z0-593 1z0-593
Explanation:
A:You can use crsctl commands as the root user to enable dynamic debugging for the Oracle
Clusterware Cluster Ready Services (CRS), Oracle Cluster Registry (OCR), Cluster Synchronization
Services (CSS), and the Event Manager (EVM).
C: You can enable debugging for the CRS, OCR, CSS, and EVM modules and their components by
setting environment variables or by issuing crsctl debug commands using the following syntax:
crsctl debug log module_name component:debugging_level
Reference: Oracle Clusterware Administration and Deployment Guide,Component Level Debugging
ITexamdump의 HP5-T01D덤프의 VCE테스트프로그램과 MB5-705덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-504시험에 대비한 고품질 덤프와 648-375시험 최신버전덤프를 제공해드립니다. 최고품질 70-497시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기