ITExamDump의Citrix인증 1Y0-A28덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다. 여러분이 신뢰가 생길수 있도록ITExamDump에서는Citrix인증 1Y0-A28덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다. Citrix인증 1Y0-A28덤프로Citrix인증 1Y0-A28시험을 준비하여 한방에 시험패하세요.
Citrix 1Y0-A28인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 ITExamDump의 인증시험덤프를 구매하는 방법 등이 있습니다.
시험 번호/코드: 1Y0-A28
시험 이름: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 123 문항
업데이트: 2014-04-27
지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중Citrix 1Y0-A28인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다. Citrix인증 1Y0-A28시험이 아무리 어려워도ITExamDump의Citrix인증 1Y0-A28덤프가 동반해주면 시험이 쉬워지는 법은 많이 알려져 있습니다. ITExamDump의Citrix인증 1Y0-A28덤프는 100% 패스보장 가능한 덤프자료입니다.한번만 믿어주시고ITExamDump제품으로 가면 시험패스는 식은 죽 먹기처럼 간단합니다.
Citrix인증 1Y0-A28시험을 패스하기 위하여 잠을 설쳐가며 시험준비 공부를 하고 계신 분들은 이 글을 보는 즉시 공부방법이 틀렸구나 하는 생각이 들것입니다. ITExamDump의Citrix인증 1Y0-A28덤프는 실제시험을 대비하여 제작한 최신버전 공부자료로서 문항수도 적합하여 불필요한 공부는 하지 않으셔도 되게끔 만들어져 있습니다.가격도 착하고 시험패스율 높은ITExamDump의Citrix인증 1Y0-A28덤프를 애용해보세요. 놀라운 기적을 안겨드릴것입니다.
1Y0-A28 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-A28.html
NO.1 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C
Citrix최신덤프 1Y0-A28 1Y0-A28 dump 1Y0-A28인증
NO.2 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B
Citrix 1Y0-A28 1Y0-A28 1Y0-A28
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix 1Y0-A28 1Y0-A28 dump 1Y0-A28기출문제
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix자격증 1Y0-A28자격증 1Y0-A28 dumps 1Y0-A28 1Y0-A28 dumps 1Y0-A28
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix시험문제 1Y0-A28 1Y0-A28 dumps 1Y0-A28
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C
Citrix 1Y0-A28자료 1Y0-A28 1Y0-A28
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B
Citrix최신덤프 1Y0-A28최신덤프 1Y0-A28인증 1Y0-A28시험문제 1Y0-A28기출문제
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C
Citrix자격증 1Y0-A28 1Y0-A28 pdf
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix 1Y0-A28 1Y0-A28최신덤프 1Y0-A28
NO.3 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix최신덤프 1Y0-A28기출문제 1Y0-A28 dumps 1Y0-A28시험문제 1Y0-A28 pdf
NO.4 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B
Citrix기출문제 1Y0-A28 1Y0-A28 1Y0-A28최신덤프 1Y0-A28기출문제 1Y0-A28
NO.5 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B
Citrix 1Y0-A28 1Y0-A28기출문제
ITexamdump의 3103덤프의 VCE테스트프로그램과 1Z0-536덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-481시험에 대비한 고품질 덤프와 1Z0-060시험 최신버전덤프를 제공해드립니다. 최고품질 CUR-011시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기