ITExamDump는 많은 IT인사들이Oracle인증시험에 참가하고 완벽한1Z0-478인증시험자료로 응시하여 안전하게Oracle 1Z0-478인증시험자격증 취득하게 하는 사이트입니다. Pass4Tes의 자료들은 모두 우리의 전문가들이 연구와 노력 하에 만들어진 것이며.그들은 자기만의 지식과 몇 년간의 연구 경험으로 퍼펙트하게 만들었습니다.우리 덤프들은 품질은 보장하며 갱신 또한 아주 빠릅니다.우리의 덤프는 모두 실제시험과 유사하거나 혹은 같은 문제들임을 약속합니다.ITExamDump는 100% 한번에 꼭 고난의도인Oracle인증1Z0-478시험을 패스하여 여러분의 사업에 많은 도움을 드리겠습니다.
ITExamDump의 Oracle 인증 1Z0-478시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. Oracle 인증 1Z0-478덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.
ITExamDump에서 출시한 Oracle인증 1Z0-478덤프는 실제시험문제 커버율이 높아 시험패스율이 가장 높습니다. Oracle인증 1Z0-478시험을 통과하여 자격증을 취득하면 여러방면에서 도움이 됩니다. ITExamDump에서 출시한 Oracle인증 1Z0-478덤프를 구매하여Oracle인증 1Z0-478시험을 완벽하게 준비하지 않으실래요? ITExamDump의 실력을 증명해드릴게요.
Oracle 1Z0-478인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.Oracle 1Z0-478시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.
많은 시간과 정신력을 투자하고 모험으로Oracle인증1Z0-478시험에 도전하시겠습니까? 아니면 우리ITExamDump 의 도움으로 시간을 절약하시겠습니까? 요즘 같은 시간인 즉 모든 것인 시대에 여러분은 당연히 ITExamDump의 제품이 딱 이라고 생각합니다. 그리고 우리 또한 그 많은 덤프판매사이트 중에서도 단연 일등이고 생각합니다. 우리 ITExamDump선택함으로 여러분은 성공을 선택한 것입니다.
시험 번호/코드: 1Z0-478
시험 이름: Oracle (Oracle SOA Suite 11g Essentials)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2014-04-20
1Z0-478 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-478.html
NO.1 You expand a business rule component that a colleague added to the BPEL process. You see an
Assign element named Facts_To_Rule_Service.
Which statement is true bout this Assign element?
A. It was added automatically based on entries that your colleague made in the dialog box that
approved when the business rule component was added to the BPEL model.
B. Your colleague manually added this Assign element after adding the business rule component to
the BPEL Model.
C. This Assign element was automatically added when your colleague manually addedthe
corresponding Rule_Service_To_Facts assign to the BPEL model.
D. You can delete this Assign because it was created for documentation purposes only.
Answer: A
Oracle dump 1Z0-478 1Z0-478 1Z0-478 1Z0-478
Explanation:
Note: *Facts_To_Rule_Service: Assigns the facts to a variable.
NO.2 In your solution, a web service client needs to invoke a series of three web services in support
of a single transaction. The third web service needs the identity of the original web service client.
Which statement describes how the identity is made available by Oracle Web Services Manager
(OWSM)?
A. The transaction manager accesses an internal table that maintains credentials used to invoke
each individual web service in the chain.
B. Each web service in the chain does its own authentication so the third web service handles its
own identity checking.
C. OWSM sets the user in the Java Authentication and Authorization (JAAS) Subject when the first
web service successfully authenticates, and the Java Subject is used by subsequent web services to
access the identity.
D. OWSM stores a SAML token from the first web service invocation in a database table, and that
table is accessed by subsequent web services in the chain to retrieve identity.
Answer: D
Oracle인증 1Z0-478시험문제 1Z0-478 dumps
Explanation:
Oracle Web Services Manager is a component of the Oracle Enterprise Manager Fusion Middleware
Control, a run-time framework that provides centralized management and governance of Oracle
SOA Suite environments and applications. You create and configureOracle Web Services Manager
policies in Oracle Enterprise Manager, and those policies are persisted in a policy store (a database
is recommended). Oracle Web Services Manager lets you define policies against an LDAP directory
and generate standard security tokens (such as SAML tokens) to propagate identities across multiple
Web services used in a single transaction.
NO.3 Identify two correct descriptions of Oracle Web Services Manager (OWSM).
A. It enables you to externalize web services security from the applications youbuild.
B. It manages policies in a distributed policy manager that serves as a single policy enforcement
point.
C. Use security and management events, captured by OWSM agents, are displayed using Oracle
BAM.
D. It supplies predefined security policies that enable declarative security and management
definition.
E. It uses Oracle Event Processing (OEP) to determine when security violations have occurred.
Answer: B,C
Oracle덤프 1Z0-478 1Z0-478 dumps 1Z0-478
Explanation:
Note: *Oracle WSM allows companies to (1) centrally define and store declarative policies applied
to the multiple web services making up a SOA infrastructure, (2) locally enforce security and
management policies through configurable agents, and (3) monitor runtime security events such as
failed authentication or authorization.
*Oracle Web Services Manager offers a comprehensive and easy-to-use solution for policy
management and security of service infrastructure. It provides visibility and control of the policies
through a centralized administration interface offered by Oracle Enterprise Manager.
NO.4 Which two approaches are valid when using dynamic partner links in a BPEL process?
A. A WSDL file, which contains multiple services that use the same portType, is available at design
time, but the decision to determine which service is used can only be made at runtime.
B. When the BPEL process is designed, the endpoint URL of the WSDL file is known but the services
and port types are not known.
C. When the BPEL process is designed, the services and port types of the WSDL file are known but
the endpoint URI is not known.
D. A WSDL file, which contains multiple services that use different portTypes, is available at design
time, but the decision to determine which server us used can only be made at runtime.
Answer: A,C
Oracle자격증 1Z0-478 1Z0-478 1Z0-478 1Z0-478기출문제 1Z0-478자격증
Explanation:
A (not D):How To Create a Dynamic Partner Link at Design Time for Use at Runtime
To create a dynamic partner link at design time for use at runtime:
etc
C (not B):The BPEL specification mandates that only the partner endpoint reference (EPR) can be
changed dynamically. In BPEL terms, only the partnerRole of a partner link element can have a new
value assigned. The myRole value doesn't change after the BPEL has been deployed.
Note: *Dynamic Partner Links and Dynamic Addressing During the design-time of an application,
you may need to configure certain services whose endpoints (addresses) are not known beforehand,
or it may be necessary to change an endpoint reference while the application is running. The
Dynamic Partner link feature allows you to dynamically assign an endpoint reference to the partner
link. This means that you can use onepartner link for subsequent calls to different web-services
(provided that the services use the same interface). *For successful deployment of the process, a
partner link should be completely defined. When you deploy the project, the WSDL file for the
partner link should contain and define both the abstract and the concrete information for the
partner link, including address and port, though later the concrete information can be changed
independently from the WSDL file.
NO.5 A partner needs to access services that are defined in one of your Service Composite
Architecture (SCA) applications via a web service interface. Which approach (and accompanying
reasoning) describes a loosely coupled and robust solution?
A. Use Oracle Service Bus to provide an Interface layer over your SCA application. This enables you
to hide the locations of your SCA application, perform load-balancing across those endpoints, and
provide the ability to define service level agreements to help ensure that you are meeting your
contractual obligations to the partner.
B. Use the Mediator component to provide a web service interface to your SCA application. This
arrives you the flexibility of using the industry standard XSLT technology to perform translation and
transformations.
C. Use Oracle Service Bus to provide an interface layer over your SCA application. This enables you
to "skin" your SCA application with a web service interface and still provide a robust experience to
the partner.
D. Allow the partner simply to connect directly to the SCA application. This provides the best
performance and helps keep the partner happy.
Answer: B
Oracle 1Z0-478 1Z0-478 1Z0-478 dump 1Z0-478
NO.6 When more than one policy is attached to a policy subject, the combination of policies needs
to be valid. Which statement is true about the valid combination of policies for a policy subject?
A. Only one MTOM policy can be attached to a policy subject.
B. More than one Reliable Messaging policy can be attached to a policy subject.
C. Both a Reliable Messaging policy and a WS-Addressing policy cannot be attached to the same
policy subject.
D. Only one security policy can be attached to a policy subject.
Answer: A
Oracle dump 1Z0-478기출문제 1Z0-478
Explanation:
Note:
*Within a SOA composite application, you must attach the Oracle WS-MTOM policy to service and
reference binding components to receive and send MTOM (MIME binary) attachments within
Oracle SOA Suite.
*Message Transmission Optimization Mechanism (MTOM)
Ensures that attachments are in MTOM format. This format enables binary data to be sent to and
from web services. This reduces the transmission size on the wire.
*ReliabilityPolicy
Supports the WS-Reliable Messaging protocol. This guarantees the end-to-end delivery of
messages.
* Addressing Policy Verifies that simple object access protocol (SOAP) messages include
WS-Addressing headers in conformance with the WS-Addressing specification. Transport-level data
is included in the XML message rather than relying on the network-level transport to convey this
information.
NO.7 Composite X invokes an outbound DB adapter to write data to a database table. You have
configured JCA at the binding component as follows:
<property name = "jca.retry.count" type = "xs:int" many = "false" override = "may" > 2</property>
<property name = "jca.retry.interval" type = "xs:int" many = "false" override = "may" > 2</property>
You have also modeled a modeled a fault policy to retry the invocation three times in case of
remoteFault as follows:
<retryCount>3<retryCount>
<retryInterval>3<retryInterval>
Which result describes what happens when the database that is being accessed by the above
binding component goes down?
A. The invocation is retrieved for a total of two times every two seconds. Fault policy retries are
ignored.
B. The invocation is retried for a total of six times every three seconds.
C. The invocation is retried for a total of six times every two seconds.
D. The fault policy retries occur within the JCA retries. So two JCA retries are executed two seconds
apart. Within each JCA retry, three fault policy retries are executed three seconds apart.
E. The JCA retries occur within the fault policy retries. So three fault policy retries are executed
three seconds apart. Within each fault policy retry, two JCA retries are executed two seconds apart.
Answer: E
Oracle최신덤프 1Z0-478자격증 1Z0-478 1Z0-478
Explanation:
Note: *Global retries for any error handling are returned to the BPEL Receive activity instance, for
example, or, more generally, to the point at which the transaction started. Such a retry could occur
if there was an error such as a temporary database fault. The default retry count is by default
indefinite, or specified in the jca.retry.count property.
*Properties you can specify in the composite.xml file include:
/jca.retry.count
Specifies the maximum number of retries before rejection. Again, specifying this value is a pre-
requisite to specifying the other property values.
/jca.retry.interval
Specifies the time interval between retries (measured in seconds.)
*A remoteFault is also thrown inside an activity. It is thrown because the invocation fails. For
example, a SOAP fault is returned by the remote service.
NO.8 Identify two features of Oracle BAM.
A. Enterprise Manager's monitoring capabilities are central to Oracle BAM's ability to monitor
performance indicators.
B. You can analyze and present Information from activities spanning multiple systems and
applications.
C. Rich browser-based dashboards provide visibility into current values of key performance
indicators (KPIs).
D. There is a built-in trouble ticket system to track assignment and completion of corrective actions.
Answer: A,C
Oracle 1Z0-478 1Z0-478 1Z0-478 1Z0-478자격증
Explanation:
Note: *Oracle Business Activity Monitoring (Oracle BAM) gives business executives the ability to
monitor their business services and processes in the enterprise, to correlate KPIs down to the actual
business process themselves, and most important, to change business processes quickly or to take
corrective action if the business environment changes.
NO.9 Which two features are provided by decision tables?
A. Sets of input data can be bucketed and reviewed for gaps.
B. Data sets can be reviewed for conflicts.
C. Data can be used for only one rule evaluation.
D. A rule evaluation can be used only to enter new output data.
Answer: A,B
Oracle자격증 1Z0-478 1Z0-478자격증 1Z0-478
Explanation:
After you create a Decision Table there are operations that you may want to perform on the
Decision Table, including the following:
(A)Find and fix gaps in a Decision Table (B)Finding and resolving conflicts between rules in a
Decision Table Compact or split cells in a Decision Table Merge a condition or split a condition in a
Decision Table
A: *Compact the Decision Table
In this step you compact the rules to merge from eighteen rules to nine rules. This automatically
eliminates the rules that are not needed and preserves the no gap, no conflict properties for the
Decision Table.
*The Conditions area in a Decision Table includes one or more condition rows. Each condition row
has a condition expression and, for each rule, a condition cell. A condition expression is an
expression that you build in Rules Designer. The condition expression is often a fact property or a
function result, but it can be any expression that has a type that can be associated with a bucketset.
B:A Decision Table displays multiple related rules in a single spreadsheet-style view. In Rules
Designer a Decision Table presents a collection of related business rules with condition rows, rules,
and actions presented in a tabular form that is easy to understand. Business users can compare cells
and their values at a glance and can use Decision Table rule analysis features by clicking icons and
selecting values in Rules Designer to help identify and correct conflicting or missing cases.
ITexamdump의 HP2-N35덤프의 VCE테스트프로그램과 000-278덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 700-101시험에 대비한 고품질 덤프와 000-614시험 최신버전덤프를 제공해드립니다. 최고품질 C_TSCM52_66시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기