우선 우리ITExamDump 사이트에서Microsoft 070-660관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Microsoft 070-660덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.
ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 Microsoft인증070-660시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 Microsoft인증070-660덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
시험 번호/코드: 070-660
시험 이름: Microsoft (TS:Windows Internals)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 68 문항
업데이트: 2013-11-12
우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증070-660시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
우리ITExamDump 사이트에서Microsoft 070-660관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.
070-660 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-660.html
NO.1 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. For a hardware device, you are developing a Windows device driver. You will install the
device driver and hardware device on computers that run Windows Server 2008. Now you have to find out
the amount of time that the processor uses to receive and process interrupts. Which of the following tools
should be used?
A.You should choose to use Pview.exe
B.You should choose to use Taskmgr.exe
C.You should choose to use Eventvwr.msc
D.You should choose to use Perfmon.msc
Answer:D
Microsoft인증 070-660 070-660 070-660 070-660 070-660최신덤프
NO.2 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a computer named c01. Windows Server 2008 is run by C01. Now you are
using WinDbg to debug C01. You find that one thread is waiting for a critical section. This section is
owned by another thread. You have to locate the critical section. Of the following WinDbg commands,
which one should be used?
A.You should choose to use.thread
B.You should choose to use !deadlock
C.You should choose to use!kdext.locks
D.You should choose to use!ntsdexts.locks
Answer:D
Microsoft 070-660 070-660 dump 070-660자격증 070-660인증
NO.3 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a colleague named Jason in the company. He has a computer named C01. C01
runs Windows Vista. He finds that a service process is using 100 percent of the processor. He has to
force a process dump of the service, meanwhile the service is consuming 100 percent of the processor.
He has no idea about which tool he should use. Since you are the technical support, he asks for your
answer. So which of the following tools should be used?
A.He should choose to use Umdh.exe
B.He should choose to use Tlist.exe
C.He should choose to use Pview.exe
D.He should choose to use Adplus.vbs
Answer:D
Microsoft최신덤프 070-660 070-660덤프 070-660
NO.4 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, you are debugging a Windows device driver. An
unexpectedly long delay occurs on the device driver. You locate the problem in the following
synchronization mechanism. kd> dt var_sema Local var @ 0xf9dfbc48 Type _KSEMAPHORE +0x000
Header : _DISPATCHER_HEADER +0x010 Limit : 2 kd> dt nt!_DISPATCHER_HEADER f9dfbc48
+0x000 Type : 0x5 '' +0x001 Absolute : 0xe6 '' +0x002 Size : 0x5 '' +0x003 Inserted : 0xbb '' +0x004
SignalState : 0 +0x008 WaitListHead : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] kd> dt
nt!_KWAIT_BLOCK 0x819ca438 +0x000 WaitListEntry : _LIST_ENTRY [ 0xf9dfbc50 - 0xf9dfbc50 ]
+0x008 Thread : 0x819ca3c8 _KTHREAD +0x00c Object : 0xf9dfbc48 +0x010 NextWaitBlock :
0.819ca480 _KWAIT_BLOCK +0x014 WaitKey : 0 +0x016 WaitType : 1 kd> dt nt!_KWAIT_BLOCK
0xf9dfbc50 +0x000 WaitListEntry : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] +0x008 Thread :
0.00000002 _KTHREAD +0x00c Object : 0xfd050f80 +0x010 NextWaitBlock : 0xffffffff _KWAIT_BLOCK
+0x014 WaitKey : 0 +0x016 WaitType : 0 You have to find out the number of threads that the semaphore
currently has waiting. How many threads does the semaphore currently have waiting?
A.0
B.1
C.2
D.4
E.5
Answer:B
Microsoft 070-660시험문제 070-660인증 070-660 070-660인증 070-660
NO.5 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, an I/O dispatch routine is being written by you
for a Windows device driver. buffered I/O is supported by the device driver. 1 KB of data to the user
process is transferred by the dispatch routine. The kernel address of the 1-KB buffer needs to be retrieved
from the I/O request packet (IRP). Which field of the IRP contains the kernel address?
A.Irp->UserBuffer
B.Irp->Overlay.UserApcContext
C.Irp->Tail.Overlay.DriverContext[0]
D.Irp->AssociatedIrp.SystemBuffer
Answer:D
Microsoft시험문제 070-660기출문제 070-660 070-660최신덤프
NO.6 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of an application. This application runs at a customer's site. Because
of heap corruption, the application crashes intermittently. In order to enable yourself to check and resolve
the heap corruption, you ask the customer to have full page heap enabled on the application process. You
receive a user dump file from the customer. What you should do is to make it clear at the time that the
user dump was created, whether the full page heap was enabled. Of the following WinDbg commands,
which one should be used?
A.!vm should be used.
B.!gflag should be used.
C.!heap should be used.
D.!verifier should be used.
Answer:B
Microsoft 070-660자격증 070-660자격증 070-660 dump
NO.7 You are the IT professional who work in an International company named Wiikigo. You are
experienced in troubleshooting operating systems and applications that are not working correctly,
identifying code defects and so on. You have enough knowledge on windows internals and you provide
technical support for the company. You are in charge of an application service. Because of heap
corruption, it crashes intermittently. When it occurs, you have to detect the heap corruption. Of the
following tolls, which one should be used?
A.You should choose to use Page Heap
B.You should choose to use Special Pool
C.You should choose to use driver Verifier
D.You should choose to use Memory Pool Monitor
Answer:A
Microsoft 070-660 070-660 pdf 070-660 pdf
NO.8 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of a multithreaded application. Now is being tested by you. You have
to use Perfmon to test the application for heap leaks. Of the following counters, which one should be
monitored?
A.Process\Private Bytes
B.Memory\Available Bytes
C.Memory\Committed Bytes
D.Process\Pool Paged Bytes
Answer:A
Microsoft pdf 070-660인증 070-660인증
NO.9 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are writing a user application that runs on Windows Server 2003. According to the
company requirement, a user application is being written by you. This application runs on Windows
Server 2003. User authentication is need by the design specification for the application. You must make
sure that each time the application is started, a local user name and password is entered by users. So
which routine should be used?
A.CredUIParseUserName()should be used.
B.LsaRegisterLogonProcess()should be used.
C.CredReadDomainCredentials() should be used.
D.CredUIPromptForCredentials()should be used.
Answer:D
Microsoft 070-660자격증 070-660자료
NO.10 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You have a device driver that has one monitoring thread named ThreadA. The device
driver has three worker threads. They are respectively named ThreadB, ThreadC, and ThreadD. The
worker threads run every 10 seconds and complete within 1 second. If any worker thread does not run at
least once every 30 seconds, ThreadA calls KeBugCheckEx, and then a complete kernel crash dump is
generated. A bug check and a complete kernel dump are generated by the computer. You find the
following after you review the complete kernel dump: You have to find out the root cause of the bug check.
So what caused the bug check to occur?
A.It was caused by the state of ThreadA
B.It was caused by the priority of ThreadA.
C.It was caused by the priority of ThreadD
D.It was caused by the state of ThreadA and ThreadB
E.It was caused by the state of ThreadB and ThreadC
Answer:C
Microsoft 070-660자료 070-660 pdf 070-660자료 070-660
ITexamdump의 HP0-J62덤프의 VCE테스트프로그램과 70-463덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-342시험에 대비한 고품질 덤프와 HP0-J60시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-404시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기