ITExamDump의Network Appliance인증 NS0-163덤프는 몇십년간 IT업계에 종사한 전문가들이Network Appliance인증 NS0-163 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. Network Appliance인증 NS0-163덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. ITExamDump의Network Appliance인증 NS0-163덤프는 Network Appliance인증 NS0-163시험패스의 특효약입니다.
ITExamDump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는Network Appliance NS0-163인증시험관련 덤프를 구매하신다면Network Appliance NS0-163시험은 손쉽게 성공적으로 패스하실 수 있습니다.
시험 번호/코드: NS0-163
시험 이름: Network Appliance (Network Appliance Data Protection Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 154 문항
업데이트: 2013-11-20
ITExamDump에서 제공되는Network Appliance NS0-163인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 아니 거이 같습니다. 우리ITExamDump의 덤프를 사용한다면 우리는 일년무료 업뎃서비스를 제공하고 또 100%통과 율을 장담합니다. 만약 여러분이 시험에서 떨어졌다면 우리는 덤프비용전액을 환불해드립니다.
IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. Network Appliance 인증 NS0-163시험은 아주 유용한 시험입니다. Network Appliance 인증NS0-163시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Network Appliance 인증NS0-163시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는Network Appliance 인증NS0-163시험덤프는 시장에서 판매하고 있는Network Appliance 인증NS0-163덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.
NS0-163 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-163.html
NO.1 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
Network Appliance dump NS0-163최신덤프 NS0-163
NO.2 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
Network Appliance자료 NS0-163 pdf NS0-163 dumps NS0-163 NS0-163
NO.3 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D
Network Appliance NS0-163 pdf NS0-163자격증 NS0-163
NO.4 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D
Network Appliance NS0-163 pdf NS0-163 NS0-163
NO.5 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C
Network Appliance인증 NS0-163자격증 NS0-163최신덤프 NS0-163 NS0-163자료 NS0-163
NO.6 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D
Network Appliance dump NS0-163 NS0-163 dumps
NO.7 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD
Network Appliance dump NS0-163 NS0-163
NO.8 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C
Network Appliance NS0-163기출문제 NS0-163 NS0-163
NO.9 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD
Network Appliance인증 NS0-163 NS0-163인증 NS0-163
NO.10 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B
Network Appliance dumps NS0-163 NS0-163 NS0-163 dumps
NO.11 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B
Network Appliance시험문제 NS0-163 NS0-163시험문제
NO.12 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D
Network Appliance NS0-163 NS0-163 NS0-163 dumps
NO.13 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C
Network Appliance pdf NS0-163 NS0-163자격증 NS0-163
NO.14 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A
Network Appliance NS0-163 NS0-163
NO.15 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B
Network Appliance자격증 NS0-163 NS0-163 NS0-163 NS0-163덤프
NO.16 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B
Network Appliance최신덤프 NS0-163 pdf NS0-163 NS0-163
NO.17 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B
Network Appliance pdf NS0-163 NS0-163 NS0-163자격증
NO.18 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A
Network Appliance최신덤프 NS0-163자료 NS0-163덤프 NS0-163자료
NO.19 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A
Network Appliance NS0-163 NS0-163최신덤프 NS0-163기출문제 NS0-163
NO.20 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B
Network Appliance자료 NS0-163인증 NS0-163기출문제 NS0-163
ITexamdump의 70-464덤프의 VCE테스트프로그램과 1Z0-478덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-663시험에 대비한 고품질 덤프와 000-588시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-B101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기