성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Microsoft인증 70-690시험이 영어로 출제되어 시험패스가 너무 어렵다 혹은 회사다니느라 공부할 시간이 없다는 등등은 모두 공부하기싫은 구실에 불과합니다. ITExamDump의 Microsoft인증 70-690덤프만 마련하면 실패를 성공으로 바꿀수 있는 기적을 체험할수 있습니다.제일 간단한 방법으로 가장 어려운 문제를 해결해드리는것이ITExamDump의 취지입니다.
여러분이 다른 사이트에서도Microsoft인증70-690시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에Microsoft인증70-690시험을 패스하실 수 있습니다.
비스를 제공해드려 아무런 걱정없이 시험에 도전하도록 힘이 되어드립니다. ITExamDump덤프를 사용하여 시험에서 통과하신 분이 전해주신 희소식이 ITExamDump 덤프품질을 증명해드립니다.
시험 번호/코드: 70-690
시험 이름: Microsoft (TS: Windows HPC Server 2008, Configuring and Managing (English))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 95 문항
업데이트: 2014-03-12
우리ITExamDump 에서는 여러분들한테 아주 편리하고 시간 절약함과 바꿀 수 있는 좋은 대책을 마련하였습니다. ITExamDump에서는Microsoft 70-690인증시험관련가이드로 효과적으로Microsoft 70-690시험을 패스하도록 도와드리겠습니다.만약 여러분이 다른 사이트에서도 관련덤프자료를 보셨을 경우 페이지 아래를 보시면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일것입니다.
일반적으로Microsoft인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니. 마침 우리ITExamDump 의 문제와 답들은 모두 이러한 과정을 걸쳐서 만들어진 아주 완벽한 시험대비문제집들입니다. 우리의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%보장 도를 자랑하며 만약 우리ITExamDump의 제품을 구매하였다면Microsoft관련 시험패스와 자격증취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.
ITExamDump는Microsoft 70-690인증시험의 촉매제 같은 사이트입니다.Microsoft 70-690인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이Microsoft 70-690인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의Microsoft 70-690덤프자료가 많은 도움이 될 것입니다.
Microsoft인증 70-690시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Microsoft인증 70-690덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. Microsoft 인증70-690시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Microsoft 인증70-690시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.
70-690 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-690.html
NO.1 You administer a Windows HPC Server 2008 cluster. You plan to deploy new nodes to the cluster by
using an existing node template. A folder and its files are stored on the head node. You need to ensure
that the folder and its files are copied to each node by using the Server Message Block (SMB) protocol.
Which task should you add to the node template?
A. Unicast Copy
B. Multicast Copy
C. Mount Share
D. Apply WIM Image
Answer: A
Microsoft 70-690 70-690 70-690 pdf
NO.2 You administer a Windows HPC Server 2008 cluster. You have recently deployed 10 new nodes to the
cluster. Users report that only seven of the new nodes function as part of the cluster. You discover that
three new nodes are in the Unknown state. You need to find out the problem that has prevented the three
nodes from joining the cluster. What should you do?
A. Run the Connectivity diagnostics tool and view the results of the DNS Name Resolution test.
B. Run the Connectivity diagnostics tool and view the results of the Internode Connectivity test.
C. Run the System Configuration diagnostics tool and view the results of the Required Software Updates
test.
D. Run the System Configuration diagnostics tool and view the results of the Application Configuration
test.
Answer: C
Microsoft자격증 70-690 70-690시험문제 70-690
NO.3 You administer a Windows HPC Server 2008 cluster that has 120 compute nodes. The cluster requires
10 additional compute nodes. You manually install Windows Server 2008 Enterprise Edition on 10 new
servers and connect them to the cluster networks. You open HPC Management Console, start the Add
Node Wizard, and select an option to add preconfigured compute nodes. You discover that the wizard is
unable to list any of the new servers. You need to ensure that all the new servers are available for the
wizard. What should you do before you restart the wizard?
A. Install HPC Pack 2008 on the new servers and specify the name of the head node.
B. Create a node template that does not include a step to deploy an operating system image.
C. Configure Windows Deployment Services to respond to all preboot execution environment (PXE)
requests.
D. Move the computer accounts for the new servers in the same organizational unit (OU) that contains the
computer account of the head node.
Answer: A
Microsoft 70-690 pdf 70-690
NO.4 You are a system administrator for your company. Your company has deployed a Windows HPC Server
2008 cluster. The HPC nodes are deployed by using a node template that is configured to deploy
Windows HPC Pack on each node. You need to modify the node template so that HPC PowerShell and
the HPC Cluster Manager are installed on the new nodes. What should you do?
A. Install HPC PowerShell and the HPC Cluster Manager on the HPC head node.Recreate the node
template by using the same settings.
B. Add a Run OS Command task to the node template after the Install HPC Pack task.Configure the Run
OS Command task to install the utilities.
C. Add a Unicast Copy task to the node template before the Install HPC Pack task.Configure the Unicast
Copy task to copy HPC PowerShell and the HPC Cluster Manager.
D. Add a Unicast Copy task to the node template to copy the utilities.Add a Run OS Command task to the
node template to install the utilities.Delete the original Install HPC Pack task.
Answer: D
Microsoft dumps 70-690 70-690 dump 70-690시험문제
NO.5 You are deploying a Windows HPC Server 2008 cluster for your company. The cluster head node is
configured with a network topology that has compute nodes isolated on a private network. You want to
add new servers as compute nodes to the cluster. You open the HPC Management Console, start the Add
Node Wizard, and select an option to add compute nodes from an operating system image. You start the
new servers and discover that the wizard is unable to display any of the new servers on the Select New
Nodes page. You need to ensure that the new servers are displayed on the Select New Nodes page of the
wizard. What should you do?
A. Configure the network switches to support the cut-through switching method.
B. Configure Windows Deployment Services on the head node to respond to all preboot execution
environment (PXE) requests.
C. Configure the compute node servers for preboot execution environment (PXE) boot from the NIC that
is connected to the private network.
D. Prestage computer accounts for the new servers in Active Directory Domain Services.
Answer: C
Microsoft dumps 70-690 dumps 70-690 70-690
NO.6 You administer a Windows HPC Server 2008 cluster that has 150 nodes. Users report that cluster jobs
take longer than normal to complete. You need to calculate the network latency between the nodes. What
should you do?
A. Run a serial ring test across all nodes by using the mpipingpong.exe utility.
B. Run the ping command on all broker nodes by using the clusrun.exe utility.
C. Run the etl2otf command on all nodes by using the mpiexec.exe utility.
D. Run the etl2clog command on all broker nodes by using the mpiexec.exe utility.
Answer: A
Microsoft자료 70-690기출문제 70-690 dump 70-690자격증 70-690기출문제
NO.7 You administer a Windows HPC Server 2008 cluster. All jobs submitted to the cluster fail. You discover
that the nodes communicate successfully. You need to ensure that the jobs can be submitted successfully.
What should you do first.?
A. Start the HPC Basic Profile Web Service on all nodes.
B. Start the HPC Cluster Manager and enable job Backfilling.
C. Start the HPC Cluster Manager and run the MPI Lightweight throughput test.
D. Start the HPC Cluster Manager and run the job submission diagnostics tool on all nodes.
Answer: D
Microsoft 70-690덤프 70-690 pdf 70-690
NO.8 You are a system administrator for your company. Your company deploys a new Windows HPC Server
2008 cluster. The company requires a record of performance information over time. The record must
include link latency and throughput statistics. You need to periodically execute a command that collects
the required information. Which command should you run?
A. ping.exe
B. nltest.exe
C. mpipingpong.exe
D. Get-HPCMetric.ps1
Answer: C
Microsoft 70-690자료 70-690최신덤프
NO.9 You administer a Windows HPC Server 2008 cluster for your company. You plan to configure a new
node template to deploy the evaluation edition of Windows Server 2008 HPC Edition. You need to ensure
that the deployment of nodes that use the template is successful. What should you do?
A. Add a Tag element to the node XML file. Set the value of the attribute of the Tag element to Evaluation.
B. Add a Template element to the node XML file. Set the value of the Name attribute to Evaluation.
C. Add a Template element to the node XML file. Set the value of the Provisioned attribute to False.
D. Add a Template element to the node XML file. Set the value of the ProductKey attribute to a valid
Windows Server HPC Edition product key.
Answer: D
Microsoft 70-690 70-690 70-690
NO.10 You administer a Windows HPC Server 2008 cluster for your company. You plan to add new nodes to
the cluster by using bare metal provisioning capabilities. You need to ensure the new nodes adhere to
your company naming standards. What should you do?
A. Add a naming series to the head node.
B. Modify the NodeConfigurationFile.xsd file.
C. Modify the NodeInfo.xml file to contain an appropriate name for each node.
D. Create a new node template that contains an appropriate name for each node.
Answer: A
Microsoft dumps 70-690 pdf 70-690최신덤프 70-690최신덤프
ITexamdump의 HP2-B103덤프의 VCE테스트프로그램과 HP0-S34덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J67시험에 대비한 고품질 덤프와 1Z1-536시험 최신버전덤프를 제공해드립니다. 최고품질 HP0-Y46시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기