자기한테 딱 맞는 시험준비공부자료 마련은 아주 중요한 것입니다. ITExamDump는 업계에 많이 알려져있는 덤프제공 사이트입니다. ITExamDump덤프자료가 여러분의 시험준비자료로 부족한 부분이 있는지는 구매사이트에서 무료샘플을 다운로드하여 덤프의일부분 문제를 우선 체험해보시면 됩니다. ITExamDump에서 제공해드리는 퍼펙트한 덤프는 여러분이 한방에 시험에서 통과하도록 최선을 다해 도와드립니다.
ITExamDump의 Oracle인증 1Z0-108덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 Oracle인증 1Z0-108덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 Oracle인증 1Z0-108로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.
Oracle인증1Z0-108시험준비를 하고 계시다면ITExamDump에서 출시한Oracle인증1Z0-108덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Oracle인증1Z0-108시험패는ITExamDump제품으로 고고고!
지난 몇년동안 IT산업의 지속적인 발전과 성장을 통해Oracle 인증1Z0-108시험은 IT인증시험중의 이정표로 되어 많은 인기를 누리고 있습니다. IT인증시험을ITExamDump덤프로 준비해야만 하는 이유는ITExamDump덤프는 IT업계전문가들이 실제시험문제를 연구하여 시험문제에 대비하여 예상문제를 제작했다는 점에 있습니다.
시험 번호/코드: 1Z0-108
시험 이름: Oracle (Oracle WebLogic System Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 141 문항
업데이트: 2014-03-18
Oracle 인증1Z0-108인증시험공부자료는ITExamDump에서 제공해드리는Oracle 인증1Z0-108덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.
여러분은 아직도Oracle 1Z0-108인증시험의 난이도에 대하여 고민 중입니까? 아직도Oracle 1Z0-108시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.
만약Oracle인증1Z0-108시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Oracle인증1Z0-108시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다
1Z0-108 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-108.html
NO.1 Requirement demands that an incoming request from a portfolio manager has to have a higher priority
compared to other users of the application. As an administrator, which one of the following approaches
would you adopt?
A. Use Work Manager with the execute thread model to set up rules to associate a priority to the user.
B. Use Work Manager fair-share-request-class to associate a priority to the user.
C. Use Work Manager response-time-request-class to associate a priority to the user.
D. Use Work Manager context-request-class to associate a priority to the user.
Answer: D
Oracle 1Z0-108최신덤프 1Z0-108인증 1Z0-108
NO.2 An application-wide deployment plan was used to deploy an application. Based on post-performance
diagnosis, the HTTP post size needs to be reduced. Following would be a valid approach:
A. Configure the http maximum post size value in the existing deployment plan for redeploying using the
weblogic.Deployer utility.
B. Update the http maximum post size for the application using weblogic.Deployer.
C. Use weblogic.PlanGenerator to update http maximum post size configuration and redeploy the
application.
D. Use weblogic.Admin to set auto-tune-http-setting to be true and redeploy the application.
Answer: A
Oracle dump 1Z0-108 1Z0-108 pdf 1Z0-108 dump
NO.3 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
If the admin server for New York cluster crashes, what will be the effect on inter-cluster communication
between the two sites?
A. There's no effect on the inter-cluster communication between the two sites
B. JDBC session flushing between two sites will be affected and will only be restarted on the Admin server
reboot.
C. Intra-cluster multicasting will be affected and inter-cluster communication will slow down between the
sites.
D. The Managed Servers will lose session stickiness and the server Health state will be changed to
suspend.
E. Both c and d
Answer: A
Oracle인증 1Z0-108자료 1Z0-108인증 1Z0-108자격증
NO.4 Which of the following statements are true for built-in roles in the WebLogic Server Administration
console? Choose two.
A. Users who belong to the Operator role can deploy the applications.
B. Users who belong to the Monitor role can view the server configuration, except for the encrypted
attributes.
C. Users who belong to the Admin role cannot deploy applications.
D. Only users who belong to the Admin role can start, stop, and resume the server.
E. Users who belong to the Admin role can modify the entire server configuration.
Answer: BE
Oracle 1Z0-108최신덤프 1Z0-108 1Z0-108인증
NO.5 In a multi-server WebLogic domain, monitoring the JVM statistics showed frequent full garbage
collections (gc) on one of the server instances. Which one of the following would greatly reduce the
frequency of full gcs?
A. Increasing the young object space in the heap
B. Turning the -verbosegc flag on
C. Adding more servers to the domain
D. Running more servers per machine
Answer: A
Oracle자료 1Z0-108 1Z0-108 1Z0-108
NO.6 The deployment configuration for an application or module is NOT stored in which type of the following
XML document:
A. J2EE deployment descriptors
B. weblogic-*.xml descriptors
C. WebLogic Server deployment plans
D. WebLogic config.xml
Answer: D
Oracle덤프 1Z0-108 1Z0-108 1Z0-108 1Z0-108기출문제
NO.7 Click on the Exhibit button.
Scenario : A multi-network cluster, say WAN-1 and WAN-2, is being created that will provide WAN HTTP
session failover. The WAN-1 cluster is located in London and the WAN-2 cluster is located in New York and
is connected via a slow interconnect. The client request passes through a Global load balancer which load
balances the request to local load balancers which eventually pass the load to WebLogic Server instances
in the cluster. Four WebLogic Server instances will be running on each cluster distributed on two physical
machines, two WebLogic instances per physical machine. A database is configured on each cluster for
HTTP Session state failover between the clusters.
How can you configure in-memory session replication on the London cluster?
A. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
memory.
B. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
replicated.
C. The web application deployment descriptor, weblogic.xml needs to have the persistent-store-type set to
cookie.
D. The web application deployment descriptor, web.xml needs to have the persistent-store-type set to
memory.
E. The web application deployment descriptor, web.xml needs to have the persistent-store-type set to
replicated.
Answer: B
Oracle 1Z0-108 1Z0-108 1Z0-108
NO.8 The feature to group messages into a single unit that is processed sequentially in the order that the
messages were created is called
A. Unit-or-Sort
B. Message Sorting
C. Destination Keys
D. Unit-of-Order
Answer: D
Oracle 1Z0-108 1Z0-108 dumps 1Z0-108자격증 1Z0-108
NO.9 Which of the following is true about JMS Quota resources in WebLogic Server 10.x?
A. Quota settings can be shared across multiple JMS destinations so that they can compete.
B. Quota settings are defined on the JMS connection factory level.
C. Quota settings can be used to limit the number of JMS Connections to a JMS Server.
D. Quota settings can be shared across multiple WebLogic domains.
Answer: A
Oracle 1Z0-108 1Z0-108자격증 1Z0-108 pdf 1Z0-108
NO.10 Click on the Exhibit button.
Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration ?one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 10.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to upgrade
the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to configure
multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is via a JMS
message bridge. When a service engineer calls in with a report, a message is sent via JMS to the
Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is not
lost because the call management system is not able to resend messages. To address this, the Customer
Service application is accessing a persistent JMS Queue using an XA compatible connection factory.
The database security team insists that any use of the corporate Oracle database can be traced to the
individual user that made the request. How can this be achieved when using WebLogic JDBC Data
Sources?
A. Set the Enable Credential Mapping property for the Data Source.
B. Set Initial Capacity to zero, so each user creates a new connection.
C. Set the value of user to {WLS_USER} in the Properties field.
D. This can only be done using application code.
E. This cannot be done because Data Sources connect using a single username.
Answer: A
Oracle기출문제 1Z0-108 1Z0-108 1Z0-108
NO.11 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
10.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A
Oracle dump 1Z0-108자료 1Z0-108덤프 1Z0-108 1Z0-108 1Z0-108
NO.12 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
What would be the characteristics of the above WAN Cluster for optimal performance and scalability?
A. High network latency, asynchronous persistent replication between WAN-1 and WAN-2, synchronous
intra-cluster replication and cross-cluster replication via in-memory, JDBC or file persistence.
B. Fast network, synchronous persistent replication between WAN-1 and WAN-2, asynchronous replication
intra-cluster and cross-cluster replication via file persistence.
C. High network latency, asynchronous persistent replication between WAN-1 and WAN-2, synchronous
intra-cluster replication and cross-cluster replication via JDBC
D. Low network latency, asynchronous persistent replication between WAN-1 and WAN-2, no intra-cluster
replication and cross-cluster replication via JDBC
E. Fast network, synchronous persistent replication between WAN-1 and WAN-2, asynchronous
intra-cluster replication and cross-cluster replication via cookie persistence.
Answer: C
Oracle dumps 1Z0-108덤프 1Z0-108
NO.13 JMS interop modules are different from JMS system resource modules because (Choose two)
A. JMS interop modules cannot use "Unit-of-Order".
B. JMS interop modules can be targeted to multiple WebLogic Servers at the same time in a domain.
C. JMS interop module configuration is always stored as interop-jms.xml.
D. JMS interop module cannot use "Quota."
Answer: BC
Oracle자료 1Z0-108 1Z0-108인증
NO.14 Scenario : A single tier WebLogic cluster is configured with six Managed Servers. An Enterprise
application is deployed to the cluster with a web application and EJBs packaged in the same EAR file.
A JSP in the web application makes an initial Context lookup on the stateless EJB and makes multiple
method calls to the EJB. Which of the following is true?
A. Each method call is invoked on an EJB on the same server as the web application as long as the server
is not overloaded.
B. Each method call is invoked on the same EJB in the same server as the web application as long as the
server is not overloaded.
C. Each method call round robins between the servers.
D. The behavior depends on the load algorithm on the replica-aware stub.
E. Every third call goes to a random server.
Answer: A
Oracle덤프 1Z0-108 1Z0-108인증 1Z0-108자격증 1Z0-108
NO.15 When a message is being processed by a consumer, the other unprocessed messages which belong to
the same Unit-of-Order will be:
A. Expired
B. Blocked
C. Delivered to the consumers
D. Rolled back
Answer: B
Oracle 1Z0-108덤프 1Z0-108자료
NO.16 Scenario : Consider an upgrade requirement from pre-WebLogic Server 10.x to the WebLogic Server
10.x. Since the administration scripts in the prior version used WebLogic Ant tasks for creation and
deployment, the team decides to use the Ant build.xml approach and extend this to the current version of
the server.
Which of the following about the Ant task wlserver is INCORRECT?
A. wlserver can be used to start, reboot or shut down server instances.
B. wlserver can be used to connect to existing server instances.
C. wlserver can be used to create a multiple server domain configuration.
D. wlserver can be used to create a single server domain and to connect to the server.
Answer: C
Oracle 1Z0-108 pdf 1Z0-108 1Z0-108 1Z0-108덤프
NO.17 Scenario : A single tier WebLogic cluster is configured with six Managed Servers. An Enterprise
application is deployed to the cluster with a web application and EJBs packaged in the same EAR file.
An EAR file is being deployed to the cluster using two-phase deployment. Which of the following is true if
one of the Managed Servers is NOT started in the cluster?
A. First and second phase deployment will be completed on all remaining instances in the cluster.
B. First phase deployment will not be completed on the remaining instances in the cluster.
C. First phase deployment will be completed but the second phase will not be completed on the remaining
instances in the cluster.
D. First and second phase deployment will not be completed if enforceClusterConstraints is set to true for
the Deployer.
E. Both a and d
Answer: E
Oracle 1Z0-108 1Z0-108시험문제
NO.18 Click on the Exhibit button.
Scenario : A multi-cluster architecture, with two geographically separated clusters (WAN-1 and WAN-2), is
being created. It will provide cross-cluster WAN HTTP session failover. The WAN-1 cluster is located in
London and the WAN-2 cluster is located in New York and is connected via a slow interconnect. The client
request passes through a Global load balancer which load balances the request to local load balancers
which eventually pass the load to WebLogic Server instances in the cluster. Four WebLogic Server
instances will be running on each cluster distributed on two physical machines, two WebLogic instances per
physical machine. A database is configured on each cluster for HTTP Session state failover between the
clusters.
What happens if all the servers hosted in the London cluster crashes in the middle of an http session
update?
A. The session will be regenerated on the New York cluster without any session data loss, and a new
primary server will be created using the secondary session data.
B. The session will be regenerated on the New York cluster but there could be a loss of session data; a new
primary server will be created using the last known secondary session data.
C. The session will not be regenerated on any cluster; the user will be redirected to the New York cluster to
create a new session.
D. The session will be regenerated if the primary server on the London cluster is restarted.
E. Both b and d
Answer: B
Oracle 1Z0-108 1Z0-108 dumps 1Z0-108기출문제
NO.19 Scenario : The Stock Control Application you are going to deploy to a cluster of WebLogic Managed
Servers requires a JMS destination to asynchronously deliver the messages to the back-end Warehousing
Application. To distribute the messages across the cluster, you decided to configure the distributed
destination. Also the Warehousing Application is a legacy application written to implement a proprietary MQ
API connecting an MQ-Series server. The Stock Control Application is implemented as a web application on
a WebLogic cluster delivering the message to the distributed destination. The cluster has three Managed
Servers hosted on two high powered machines and one low range/powered machine.
To distribute the physical destinations unevenly across the clustered WebLogic Managed Servers so that
the high-powered machines can receive more messages than the low-powered machines, configure the
distributed destination with:
A. "Allocate Members Uniformly" set to false and manually select more physical destinations from the
high-powered machines
B. "Uneven Distribution" set to true and select all the physical destinations
C. "Uniform Distribute Destination" set to true and select all the physical destinations from the high-powered
and low- powered machines
D. "Load Balancing Policy" set to Random and select only the destination from the high-powered machine
Answer: A
Oracle 1Z0-108 pdf 1Z0-108기출문제 1Z0-108 1Z0-108
NO.20 Scenario : Consider a b2b commerce application hosted on a WebLogic cluster with JMS messages
being received, processed, and forwarded to external servers. The server log indicates a potential stuck
thread problem where threads are continually getting stuck and JMX monitoring indicates a continuous
backlog of pending messages that could be due to any of the in-flight messages, delayed messages, or
messages being inhibited from delivery.
The recommended approach for setting the number of execute threads would be:
A. Set the default thread pool max value to match load expectations
B. Use an iterative approach to set the max thread count value
C. Set this value the same as the max connections value set on database connections
D. Leave this setting to be handled by the Work Manager by configuring MaxThreadsConstraint
Answer: D
Oracle 1Z0-108기출문제 1Z0-108 1Z0-108 pdf
ITexamdump의 000-283덤프의 VCE테스트프로그램과 HP3-C33덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 DC0-260시험에 대비한 고품질 덤프와 JK0-U21시험 최신버전덤프를 제공해드립니다. 최고품질 000-540시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기