ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게HP인증HP0-Y16시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.
ITExamDump에서는HP 인증HP0-Y16시험대비덤프를 발췌하여 제공해드립니다. HP 인증HP0-Y16시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인HP 인증HP0-Y16시험대비덤프로HP 인증HP0-Y16시험준비공부를 해보세요. 통과율이 100%입니다.
HP HP0-Y16인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이HP HP0-Y16인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 여러분은 응시 전 저희의 문제와 답만 잘 장악한다면 빠른 시일 내에 많은 성과 가 있을 것입니다.
ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여HP HP0-Y16관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리HP HP0-Y16도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.
발달한 네트웨크 시대에 인터넷에 검색하면 많은HP인증 HP0-Y16시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의HP인증 HP0-Y16시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의HP인증 HP0-Y16 실제시험 문제를 연구하여 만든HP인증 HP0-Y16덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의HP인증 HP0-Y16덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.
ITExamDump의HP인증HP0-Y16자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는HP인증HP0-Y16시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
시험 번호/코드: HP0-Y16
시험 이름: HP (ProCurve Network Immunity Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 88 문항
업데이트: 2014-03-19
지금 사회에 능력자들은 아주 많습니다.it인재들도 더욱더 많아지고 있습니다.많은 it인사들은 모두 관연 it인증시험에 참가하여 자격증취득을 합니다.자기만의 자리를 확실히 지키고 더 높은 자리에 오르자면 필요한 스펙이니까요.HP0-Y16시험은HP인증의 중요한 시험이고 또 많은 it인사들은HP자격증을 취득하려고 노력하고 있습니다.
HP0-Y16 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y16.html
NO.1 What is a reason to create a custom group for a server zone and set that group as the source for a NIM
policy?
A. Servers handle more mission-critical traffic, so you set less drastic actions.
B. Servers trigger more false positives, so you set the NBAD sensitivities lower.
C. Threats are targeted to servers at all times, so you set the policy to any time.
D. Threats that are targeted to servers are more serious, so you set harsher actions.
Answer: A
HP pdf HP0-Y16 pdf HP0-Y16자격증
NO.2 What should you do to set up your network infrastructure for remote mirroring?
A. Enable jumbo frames.
B. Enable frame fragmentation.
C. Raise the maximum transmit unit (MTU).
D. Reserve uplink ports for the mirroring session.
Answer: A
HP HP0-Y16덤프 HP0-Y16덤프 HP0-Y16 HP0-Y16자격증
NO.3 What is a feature of anomaly-based threat detection but not signature-based threat detection?
A. detecting worms
B. detecting DoS attacks
C. detecting protocol anomalies
D. detecting undocumented attacks
Answer: D
HP자격증 HP0-Y16 HP0-Y16기출문제 HP0-Y16최신덤프 HP0-Y16최신덤프
NO.4 Which events can be signs of an unauthorized port scan? (Select two.)
A. Port Anomaly
B. DNS Tunneling
C. TCP/UDP Fanout
D. UDP Protocol Anomaly
E. TCP Protocol Anomaly
Answer: CE
HP덤프 HP0-Y16자료 HP0-Y16 HP0-Y16
NO.5 Which statement is true about the role that events play in ProCurve NIM?
A. When a particular event occurs, ProCurve NIM executes the corresponding alert.
B. When a particular event occurs, ProCurve NIM executes the corresponding policy.
C. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding alert.
D. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding policy.
Answer: C
HP HP0-Y16 HP0-Y16 HP0-Y16 HP0-Y16
NO.6 What might indicate that the sensitivity for IP fanout has been set too high?
A. IP Fanout events appear in the Events tab for almost every switch.
B. Although you do not see IP Fanout events, the IP Fanout alert triggers.
C. IP Fanout events appear in the Events tab for one switch but not others.
D. There are no IP Fanout events for days although you have configured an IP Fanout alert.
Answer: A
HP pdf HP0-Y16 HP0-Y16 HP0-Y16 dump HP0-Y16자격증
NO.7 Click the Exhibit button.
Which port in the exhibit should you select in PCM+ and configure as the mirror destination?
A. 1
B. A6
C. X0
D. B16
E. 25-48
Answer: B
HP dump HP0-Y16 dumps HP0-Y16 HP0-Y16 HP0-Y16덤프 HP0-Y16 dump
NO.8 From which NBAD event should you often exclude your servers?
A. DNS Tunneling
B. TCP/UDP Fanout
C. Protocol Anomaly
D. Packet Size Deviation
Answer: B
HP HP0-Y16덤프 HP0-Y16자격증 HP0-Y16
NO.9 Your company's regulatory compliance group has asked you for a record of changes to the Policy
Manager policies. Which report should you generate?
A. Security Audit
B. Actions by Policy
C. Executed Policies
D. Automation (Policy) History
Answer: C
HP HP0-Y16 HP0-Y16 HP0-Y16 dump HP0-Y16 HP0-Y16덤프
NO.10 You want to set up different external alerts based on the specific type of threat. Which settings can
help you accomplish this task? (Select two.)
A. Trap ID
B. Severity
C. Description
D. Anomaly ID
E. Violation Count
Answer: AC
HP HP0-Y16덤프 HP0-Y16자격증 HP0-Y16인증
NO.11 Which statement is true about setting up an action for dynamic remote mirroring?
A. You should configure the mirror source before configuring the action.
B. You should configure the mirror destination before configuring the action.
C. You configure both the mirror source and destination as part of configuring the action.
D. You should configure both the mirror source and destination before configuring the action.
Answer: B
HP HP0-Y16 dump HP0-Y16 HP0-Y16
NO.12 You want to display and print a list of all events related to the Policy Manager. What should you do?
A. From the Reports menu, select the Policy Events report.
B. In Interconnect Devices, click the Events tab; filter for Policy Manager; click the Print button.
C. From the Reports menu, select the Events report; filter for Policy Manager in the Report Wizard.
D. In Network Management Home, click the Events tab; filter for Policy Manager; click the Print button.
Answer: D
HP덤프 HP0-Y16 HP0-Y16자격증 HP0-Y16최신덤프
NO.13 Click the Exhibit button.
What are reasons to configure the policy settings shown in the exhibit? (Select two.)
A. You want the policy to respond to threats from offenders within this group.
B. You want ProCurve NIM to apply the policy for threats detected in this group.
C. You have set the policy to a source group, so you must set the target group to match.
D. You want to enable dynamic local port mirroring on set ports, which compose this group.
E. The policy action is MAC Lockout, and you want to lock the offender out of the entire group.
Answer: DE
HP HP0-Y16 HP0-Y16
NO.14 Which tab is added to PCM+ when you install ProCurve NIM?
A. Policy Events
B. Security Audit
C. Event Browser
D. Security Activity
Answer: D
HP시험문제 HP0-Y16 HP0-Y16덤프 HP0-Y16
NO.15 How does ProCurve NIM determine the severity level for a security alert?
A. from the violation count for the associated event
B. from the event, and the severity cannot be overridden
C. from the event, unless overridden by the alert configuration
D. from the event for trap events and from the alert configuration for other events
Answer: C
HP최신덤프 HP0-Y16 HP0-Y16
NO.16 Click the Exhibit button.
You are configuring a Quarantine VLAN action.
Which area in the exhibit displays settings that allow ProCurve NIM to always place the offender in the
Quarantine VLAN?
A. a
B. b
C. c
D. d
Answer: D
HP인증 HP0-Y16 pdf HP0-Y16 HP0-Y16기출문제
NO.17 Which misconfiguration on PCM+ causes ProCurve NIM to fail to detect any anomalies in traffic?
A. the wrong sFlow version
B. an incorrect operator password
C. an incorrect manager password
D. an incorrect SNMP community name
Answer: D
HP시험문제 HP0-Y16 dump HP0-Y16 HP0-Y16
NO.18 How does a ProCurve Network Immunity Solution protect a network?
A. It deals with threats from authorized users.
B. It stops unauthorized users from connecting.
C. It customizes users' rights based on their identity.
D. It filters Web content and email while searching for viruses.
Answer: A
HP HP0-Y16자료 HP0-Y16최신덤프 HP0-Y16 HP0-Y16
NO.19 A network already has an Intrusion Prevention System (IPS) that is installed between a group of
servers and the rest of the network. Which benefits does ProCurve NIM add in a NIM + IPS deployment?
(Select two.)
A. deep packet inspection
B. signature-based detection
C. remediation of infected endpoints
D. protection for other resources throughout the network
E. applies actions closer to the point of origin of the attack
Answer: DE
HP자격증 HP0-Y16최신덤프 HP0-Y16
NO.20 Click the Exhibit button.
Given the information shown in the exhibit, what do you know about alerts on the 10.1.1.1 device over the
last five hours? (Note: The orange color corresponds with Major severity.)
A. The device has received only Major alerts.
B. The majority of alerts on the device are Major alerts.
C. The highest severity for an alert on this device is Major.
D. The most recent alert received on the device was a Major alert.
Answer: C
HP자료 HP0-Y16 HP0-Y16기출문제 HP0-Y16
NO.21 When should the unified NIM + IDS deployment option be used?
A. to take immediate action to protect key resources and also track threats to the source
B. to add threat protection to the features of ProCurve NIM, which include only threat detection
C. to allow ProCurve NIM to mirror suspicious traffic to an external device for additional analysis
D. to protect against threats from wireless devices, which ProCurve NIM is not able to do on its own
Answer: C
HP HP0-Y16 HP0-Y16 HP0-Y16 HP0-Y16덤프
NO.22 Which threat mitigation action is supported on ProCurve wireless devices?
A. Port Disable
B. MAC Lockout
C. Port Rate Limit
D. Quarantine VLAN
Answer: B
HP HP0-Y16 HP0-Y16 pdf HP0-Y16 HP0-Y16
NO.23 Which alert can be triggered by SNMP traps sent by ProCurve switches?
A. default External
B. default IP Fanout
C. default IP Spoofing
D. default Virus Throttle
E. default ProCurve SNMP
Answer: D
HP최신덤프 HP0-Y16 HP0-Y16기출문제 HP0-Y16
NO.24 By default, which NBAD event will trigger traffic sampling on a port?
A. Duplicate IP
B. Virus Throttle
C. Protocol Anomaly
D. Packet Size Deviation
Answer: D
HP dump HP0-Y16시험문제 HP0-Y16 dump
NO.25 What must you do to configure a Port Rate Limit action?
A. Set the rate limit as a percentage.
B. Set the rate limit as a QoS priority value.
C. Set the rate limit as an absolute value in Kbps.
D. Enable the limit, leaving the rate to be determined by the switch configuration.
Answer: A
HP dump HP0-Y16인증 HP0-Y16기출문제
NO.26 Which action can help you troubleshoot a policy in realtime from PCM?
A. Port Mirror
B. Notify (Email)
C. Message Dialog
D. Traffic Sampling
Answer: C
HP dumps HP0-Y16 HP0-Y16 dumps HP0-Y16 dump
NO.27 What is the intended purpose of the default traffic sampling action of ProCurve NIM?
A. to prevent ProCurve NIM from triggering false positives
B. to help PCM+/NIM periodically begin to monitor new ports
C. to send traffic for increased analysis to an Intrusion Detection System (IDS)
D. to allow ProCurve NIM to take immediate action against the most probable threats
Answer: B
HP dumps HP0-Y16 HP0-Y16 dump
NO.28 How do you configure PCM+ to generate periodic reports?
A. Select the Reports button in the global toolbar.
B. Enable the periodic reports setting in PCM+ Preferences.
C. Configure the schedule in the appropriate Reports Wizard.
D. Create policies with schedule-driven alerts and report actions.
Answer: D
HP기출문제 HP0-Y16 HP0-Y16 HP0-Y16 HP0-Y16시험문제
NO.29 ProCurve NIM was registering few TCP/UDP Fanout events. You have raised the sensitivity, and
many false positive TCP/UDP Fanout events are now triggered throughout the network. What should you
do next? (Select two.)
A. Lower the sensitivity to the previous level.
B. Remove the TCP/UDP alert from all policies.
C. Plan and create a Policy Manager policy to deal with false positive events.
D. Exclude the devices triggering the false positive events from the TCP/UDP fanout.
Answer: AD
HP HP0-Y16인증 HP0-Y16
NO.30 Which features are provided in a ProCurve NIM standalone deployment? (Select two.)
A. threat mitigation without the aid of PCM+
B. resetting of TCP sessions when threats are detected
C. signature-based detection of worms and other attacks
D. applying mitigation actions near the source of the threat
E. application of different policies based on the threat's place of origin
Answer: DE
HP최신덤프 HP0-Y16 HP0-Y16인증
ITexamdump의 C_HANAIMP131덤프의 VCE테스트프로그램과 1Z0-597덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 IIA-CFSA시험에 대비한 고품질 덤프와 IIA-CGAP시험 최신버전덤프를 제공해드립니다. 최고품질 000-614시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기