여러분은 우선 우리 ITExamDump사이트에서 제공하는Lotus인증190-801시험덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용전부를 환불해드립니다.
ITExamDump는Lotus 190-801인증시험을 아주 쉽게 패스할 수 있도록 도와드리는 사이트입니다. ITExamDump의 엘리트한 전문가가 끈임 없는 노력으로 최고의Lotus 190-801자료를 만들었습니다. 이 자료로 여러분은 100%Lotus의190-801인증시험을 패스할 수 있으며, ITExamDump을 선택함으로 성공을 선택한 것입니다. ITExamDump가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 ITExamDump 인증시험덤프로 공부하였기 때문입니다. 그 중Lotus 190-801인증시험을 패스한 분들도 모두 ITExamDump인증시험덤프를 사용하였기 때문입니다.
Lotus 190-801인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Lotus 190-801인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Lotus 190-801인증시험패스에 노력을 다합니다. 하지만 우리ITExamDump에서는 20시간 좌우만 투자하면 무조건Lotus 190-801시험을 패스할 수 있도록 도와드립니다.
시험 번호/코드: 190-801
시험 이름: Lotus (IBM Lotus Notes Domino 8 Application Development Update)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2013-12-04
ITExamDump 에서 출시한 제품 Lotus인증190-801시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된Lotus인증190-801덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.
요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.Lotus 190-801시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는Lotus 190-801덤프를 제공하는 사이트입니다.
ITExamDump전문가들은Lotus 190-801인증시험만을 위한 특별학습가이드를 만들었습니다.Lotus 190-801인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게Lotus 190-801인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다
ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게Lotus인증190-801시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.
190-801 덤프무료샘플다운로드하기: http://www.itexamdump.com/190-801.html
NO.1 Clarisa's agentneeds torunevery timetheAPP012serveris rebooted. Thereis noharmtodataiftheagent r
uns repeatedly, but Clarisa would like to minimize the impact to serverperformance. How should Clarisa t
rigger the agent to run?
A. Set the Runtime Trigger option to "On event", and select "When server starts".
B. Set the Runtime Trigger option to "On event", and select "On agent manager start".
C. Set the Runtime Trigger option to "On schedule". Select "Run once", and select the schedule option"
On serverboot".
D. Set the Runtime Trigger option to "On schedule". Select "More thanoncea day". Clarisa should determ
ine how soon after a serverboot theagent must be run. The schedule frequency should be set tothat amo
unt of time.
Answer:A
Lotus 190-801 190-801 190-801
NO.2 Thedefault view in the Notes 8 Contacts database allows you todisplay the information in the view eit
heronasingle line(as withatraditional Notesview)orin a"business card"styleformat witheachentry displayed
in an individual box and the boxes arranged in columns, scrollingvertically. To create a view that allows t
his sort of "business card"format,what type of Layout Viewer do you need to specify in theView Propertie
s?
A. Tiled
B. Boxed
C. Vertical
D. Composite
Answer:A
Lotus 190-801 dump 190-801 190-801 190-801기출문제 190-801
NO.3 Myrtleis modifyingthedesignofaViewin aNotesdatabase,soit canupdateapublishedProperty that the oth
er components in a Composite Application can respond to. Where does she write code that updates a Pr
operty?
A. In a view action
B. In the OnSelect event of the view
C. In theQueryModeChange event of the view
D. In theInitialize subroutine of the Global section of the view
Answer: B
Lotus 190-801 190-801덤프 190-801
NO.4 Timmy is designing a View and he wants to use the new "Split Action Button" option for one of his Ac
tions. He creates anActionwithsubactions andchecks the"Displayas split button"box, but theActiondoesn't
work as a Split button when he looks at the view in his Notes client.Why is this?
A. Split Action buttons work only for SharedActions.
B. Split Action buttons work only for Forms.
C. Split Action buttons work only for Composite Applications.
D. The "Enable Advanced Action Bar" setting in theViewproperties has not been checked.
Answer:C
Lotus 190-801 190-801자격증 190-801 190-801인증
NO.5 Linda has selected the database property Support Response Thread History for her Call Logapplicati
on. When she looks at thedocument fields in the Document Properties dialog box, she notices a
new field has been added toeachnew document.What field does Linda see?
A. $TUA
B. $REF
C. $SRTH
D. $REF2
Answer:A
Lotus자료 190-801 190-801
NO.6 Kyle is designing a Composite Application that can send a user namefrom aform to aview, by clickinga
buttonontheform. He knows hewants to definea WiringpropertycalledReceiveUserNamethat will beused
when the view is receiving a user name string that is published by the form. When he opens theProperty
Broker Editor to define "ReceiveUserName", what does he define it as?
A. Type
B. Action
C. Event
D. Property
Answer:B
Lotus pdf 190-801최신덤프 190-801자격증 190-801인증 190-801 dump
NO.7 Thomas has utilized the rightclick menu option feature inhis application to show his custom actions.
He would like to present users with just the custom actions when they rightclick with theirmouse. How ca
n heaccomplish this?
A. Remove the default menu items from the Action Bar of the view.
B. Deselect include action in ActionBar in the Action button properties of the view.
C. Deselect show default items in rightmousemenu in the Action Bar properties of the view.
D. Select emove default items in rightmousemenu?in the Action button properties of the view.
Answer:C
Lotus 190-801 190-801시험문제
NO.8 Kristen has been asked to develop a Composite Application to "wire" the Customer, Orders, andInvent
ory applications together. She understands that this will result in communication among thedifferent piec
es of the new application. How does this communication work?
A. Components use the Composite Application Broker to communicate with each other. The CompositeA
pplication Editor is used to define Actions and their parameters, and to configure Property Broker options
B. Components use the Composite Application Broker to communicate with each other. The CompositeA
pplication Editor is launched fromDominoDesigner to define Broker Properties and configure Actions and
their parameters.
C. Components use the Property Broker to communicate with each other. TheProperty Broker Editor is l
aunched directly from Domino Designer (orcan be launched via the CAE) to define Properties and config
ure Actions and their parameters.
D. Components use the Property Broker to communicate with each other. Domino Designermust first be
used to define theWiring Properties. Composite Application Broker options can then be configured using
the Composite Application Editor orfromwithin Domino Designer.
Answer:C
Lotus 190-801 190-801자료 190-801 190-801
NO.9 Thenew "Composite Settings" option in a View column Properties box allows you to specifywhat?
A. An Action to performwhen a row in the view is selected
B. A Property to publishwhen a row in the view is selected
C. Whether or not to display the columnwhen the view is used in a Composite Application
D. An alternate font type, size, and color to use for that columnwhen the view is used in a CompositeApp
lication
Answer:B
Lotus pdf 190-801 190-801 190-801자격증 190-801 pdf
NO.10 Bonnie has a Customerview in her application that has the following columns (in order): CustomerNa
me, Customer Address, Customer Phone, Customer Comments, Last Contacted. She would like tomaxi
mize the amount of column space for the Customer Comments field. Howwould Bonnie accomplishthis in
Designer?
A. Select the "MaximumWidth"property for the CustomerComment column.
B. Set the Height indicator to 9 lines for the Customer Comments column.
C. Select the extend to useavailable windowwidth property for the Customer Comment column
D. Add the column name to the xtend to use available windowwidth property in the Customerview.
Answer:C
Lotus 190-801 190-801
NO.11 Maxie is using thenew "Defer index creation until first use" option in her views that have sortable colu
mns, in order to delay creation of these extra indices until they are needed. She notices that the extracol
umn indices are still being built immediately instead of being deferred. Why is this?
A. This option works only for categorized columns.
B. This option is related to the database's fulltext index, not the view index.
C. This option is valid only when the view is used ina composite application.
D. The server administrator needs to set the ENABLE_ON_DEMAND_COLLATIONS=1 setting in theser
ver's Notes.ini file.
Answer:D
Lotus pdf 190-801 190-801기출문제 190-801
NO.12 Scotthas just createda new NSFbased Composite Application. He has addedtwo components to his a
pplication and is about to close the Composite Application Editor (CAE). What does heneed to do if heno
wwants to see how his Composite Application appears in the user interface?
A. Scott will not be able to open the Composite Application within the user interface yet. Thedatabaselau
nch properties must first be set to "Launchas Composite Application".
B. Nothing. The CAE is opened fromwithin the Composite Application. When Scott exits the CAE, he is a
utomatically presented again with the Composite Application, open in the user interface.
C. Scott will not be able to openthe Composite Application within the user interface yet. He will first needt
o open the Composite Application using Domino Designer and set theWiring Properties.
D. When Scott exits the CAE, he is back at the Notes Workspace, just as when exiting other NSFbaseda
pplications. Doubleclick on the Composite Application's icon on theWorkspace to open it in the userinterf
ace.
Answer:B
Lotus자격증 190-801자료 190-801 190-801덤프
NO.13 Barry has just closed theProperty Broker Editor after specifying input and output Action parameters for
his Composite Application Editor (CAE). He notices a curved arrow icon in Domino Designer next to then
ame of theWiring Property. What should Barry do to ensurethat his changes are saved within his Domino
application?
A. Click the "Refresh"button, and then click the "Open" button in the window that displays.
B. Nothing. The Property Broker automatically saves changes inside the Domino application.
C. Click the "MergeWSDLs" button and click "OK" in the confirmation prompt that thendisplays.
D. Open theWiring Property properties and ensure that the "Store in NSF" option is selected. Thechange
s will be saved within the Domino application when Domino Designer is closed.
Answer:A
Lotus 190-801 190-801 190-801 dump 190-801자격증 190-801
NO.14 Luigi hascreatedaviewforhis mailfilethat shows thesize ofthe document. In thatcolumn, hewould like t
o display the size as either kilobytes or megabytes. How can Luigi accomplish this?
A. Set thenumberformat for the column to Size(K/M/G)
B. Set thenumberformat for the column to Bytes(K/M/G)
C. Set the Preferences For Display format for the column to Size(K/M/G)
D. Set the Additional Display Formattingfor the column to Bytes(K/M/G)
Answer:B
Lotus pdf 190-801 190-801인증 190-801 190-801
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.15 When Bert is designing his Composite Application, he wants tohave a Notes view that publishes aUse
rName property to another view and also to a Notes form that is open in edit mode. How does he dothis?
A. He simply uses the Composite Application Editor to wire all three components together.
B. He creates oneCompositeApplicationthat wires thetwoviews together, andthenasecondCompositeAppl
ication that incorporates the first one, with the first viewwired to the form.
C. Becauseeach component can only publish a single property, he has to wire the first viewpublish theus
er name to the second view, and then wire the second view to publish the user name to the form.
D. Becausehe can publish a property only to a single component,he has to make his first viewpublish tw
o properties (e.g. UserName1 and UserName2) that both have the same data, so that one of theproperti
es is wired to the second view and the other is wired to the form.
Answer:A
Lotus시험문제 190-801인증 190-801 dump 190-801
NO.16 Beatricecreated a newCompositeApplicationdatabasein theNotes 8client, but whensheopens itupshe s
ees a grey page that says "This Application page does not contain any content."What does shehave to d
onext?
A. Click the menu option "View Design" to open the database in Domino Designer to edit the Composite
Application definition.
B. Click the menu option "Actions Edit Application"to open the database inthe Composite ApplicationEdit
or to edit the Composite Application definition.
C. Doubleclick the grey page to open the database in the Composite Application Editor to edit theCompo
site Application definition.
D. Rightclick the grey page to open the database inDomino Designer to edit the Composite Applicationd
efinition.
Answer:B
Lotus시험문제 190-801기출문제 190-801 190-801 190-801자료
NO.17 Nina has been asked toadd several views to theSales.nsf database, manyof which are to includemulti
plesortedcolumns andmultipleusersortable columns. Howcanshe helpminimize theimpact totheserverfro
m these new views?
A. Select the "Defer index creationuntil first use" Advanced Option from the Advanced tab of thedatabase
properties.
B. Open each view that includes sorted or usersortable columns. Select the "Defer index creation until fir
st use" Index option from the Advanced tab of theviewproperties.
C. Open each view that includes sorted columns. From the Sorting tab of the column properties of eachs
orted column, select the "Defer index creation until first use" option.
D. Open each view that includes a usersortable column. From the Sorting tab of the columnproperties of
each usersortable column, select the "Defer index creation until first use" option.
Answer:D
Lotus 190-801 190-801
NO.18 Samirwants to designanddeploy aCompositeApplicationthat consists ofcomponents fromtwoLotus Not
es databases that both reside on the same Domino Server. He would like to include the CompositeApplic
ation definition inside one of the Lotus Notes databases, to make it easier to deploy and replicate. Can h
edo this?
A. No, a Composite Application definitionmust be hosted on aWebSphere Portal server.
B. No, a Composite Application definitionmust reside in a Lotus Notes database that is based on the"Bla
nk Composite Application" template.
C. Yes, he simply needs to click the "NewComposite Application"button in the Composite Applications A
pplication section of the Database design and begin writing the definition.
D. Yes, but first he needs to define the Composite Application in the Composite Application Editor andsa
ve the resulting XML file. Thenhe can createa new definition in the Composite Applications Application s
ection of the Database design and import the XML.
Answer:D
Lotus자격증 190-801 dump 190-801 dumps
NO.19 Thenew Rich Text Lite "Thumbnail" input type allows you to specify theheight and width of thethumbn
ail image, alongwithwhat other attribute?
A. File type
B. Color depth
C. Image resolution
D. Attachment name
Answer:D
Lotus 190-801 190-801 190-801자료
NO.20 Victor has a Movie Rental Notes application witha Movie Inventory view. The database is not fulltext i
ndexed, and users are complaining about the long search times when they attempt to search thedatabas
e. How can Victor prevent searching in this database if no fulltext index has been created?
A. Select thedon't allow simple search option in theDatabase properties.
B. Deselect the allow simple search option in the Movie Inventory viewproperties.
C. Deselect theallow simple search option in the Movie Inventory document properties.
D. Select the ponfirmfull text index before search option in the Database properties.
Answer:A
Lotus dumps 190-801 190-801
ITexamdump의 000-656덤프의 VCE테스트프로그램과 70-342덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-461시험에 대비한 고품질 덤프와 HP0-J66시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-B102시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기