RedHat인증 RH-202시험을 어떻게 패스할가 고민그만하고ITExamDump의RedHat 인증RH-202시험대비 덤프를 데려가 주세요.가격이 착한데 비해 너무나 훌륭한 덤프품질과 높은 적중율, ITExamDump가 아닌 다른곳에서 찾아볼수 없는 혜택입니다.
IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. RedHat인증RH-202시험준비중이신 분들은ITExamDump 에서 출시한RedHat인증RH-202 덤프를 선택하세요.
RedHat인증RH-202시험덤프의 문제와 답은 모두 우리의 엘리트들이 자신의 지식과 몇 년간의 경험으로 완벽하게 만들어낸 최고의 문제집입니다. 전문적으로RedHat인증RH-202시험을 응시하는 분들을 위하여 만들었습니다. 여러분이 다른 사이트에서도RedHat인증RH-202시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.RedHat인증RH-202시험을 응시하고 싶으시다면 ITExamDump자료만의 최고의 선택입니다.
시험 번호/코드: RH-202
시험 이름: RedHat (Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 171 문항
업데이트: 2013-12-12
IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. RedHat인증 RH-202시험은 널리 승인받는 자격증의 시험과목입니다. RedHat인증 RH-202덤프로RedHat인증 RH-202시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.
근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. RedHat인증 RH-202시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이RedHat인증 RH-202시험을 한방에 패스하도록 실제시험문제에 대비한RedHat인증 RH-202덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미RedHat RH-202인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의RedHat RH-202문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은RedHat RH-202인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.
ITExamDump의 RedHat 인증 RH-202시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. RedHat 인증 RH-202덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.
RH-202 덤프무료샘플다운로드하기: http://www.itexamdump.com/RH-202.html
NO.1 quotacheck -ufm /data
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.2 Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main
task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root
password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode. You can pass
the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But
you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already
done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a
router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.3 Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.4 swapon /dev/hda? To enable the Swap space from partition.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.5 vi /etc/fstab /dev/hda? swap swap defaults 0 0
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.6 Press w to write on partitions table.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.7 free -m Verify Either Swap is enabled or not.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.8 touch /data/aquota.user
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.9 Make Successfully Resolve to server1.example.com where DNS Server is 192.168.0.254.
Answer: 1. vi /etc/resolv.conf
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.10 mkswap /dev/hda? To create Swap File system on partition.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.11 edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
3. One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equalsized chunks known as Physical Extents
(PE). As there are several other concepts associated with the LVM system, let's start with some basic
definitions:
Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume
is a standard primary or logical partition. It can also be a RAID array.
Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs.
Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var
on an LV.
Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. ext2online -d /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
4. Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.12 Either Reboot or use partprobe command.
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.13 vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.14 Quota is implemented on /data but not working properly. Find out the Problem and implement the quota
to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system.
Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.15 quotaon -u /data
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
NO.16 Reboot the System and verify that swap is automatically enabled or not.
10. You are a System administrator. Using Log files very easy to monitor the system. Now there are 50
servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers
into on LOG Server. How will you configure the LOG Server to accept logs from remote host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log
from other host configure:
1. vi /etc/sysconfig/syslog SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart
RedHat기출문제 RH-202 RH-202자료 RH-202 RH-202기출문제
ITexamdump의 MB6-870덤프의 VCE테스트프로그램과 E20-385덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-484시험에 대비한 고품질 덤프와 000-652시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-690시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기