ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Microsoft 070-690인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft 070-690관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Microsoft 070-690자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Microsoft 070-690인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.
ITExamDump는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump의 Microsoft인증 070-690덤프는 업계에서 널리 알려진 최고품질의Microsoft인증 070-690시험대비자료입니다. Microsoft인증 070-690덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. ITExamDump의Microsoft인증 070-690덤프를 구매하시면 밝은 미래가 보입니다.
시험 번호/코드: 070-690
시험 이름: Microsoft (TS: Windows HPC Server 2008, Configuring and Managing (English))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 95 문항
업데이트: 2013-09-10
ITExamDump에서 출시한 Microsoft인증 070-690덤프는Microsoft인증 070-690시험에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.ITExamDump는 고품질 Microsoft인증 070-690덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. ITExamDump의 소원대로 멋진 IT전문가도 거듭나세요.
ITExamDump의 Microsoft인증 070-690시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 Microsoft인증 070-690덤프가 신뢰성을 다시 한번 인증해주는것입니다. Microsoft인증 070-690시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 Microsoft인증 070-690덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.
070-690 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-690.html
NO.1 You administer a Windows HPC Server 2008 cluster. You plan to deploy new nodes to the cluster by
using an existing node template. A folder and its files are stored on the head node. You need to ensure
that the folder and its files are copied to each node by using the Server Message Block (SMB) protocol.
Which task should you add to the node template?
A. Unicast Copy
B. Multicast Copy
C. Mount Share
D. Apply WIM Image
Answer: A
Microsoft 070-690시험문제 070-690덤프
NO.2 You administer a Windows HPC Server 2008 cluster that has 150 nodes. Users report that cluster jobs
take longer than normal to complete. You need to calculate the network latency between the nodes. What
should you do?
A. Run a serial ring test across all nodes by using the mpipingpong.exe utility.
B. Run the ping command on all broker nodes by using the clusrun.exe utility.
C. Run the etl2otf command on all nodes by using the mpiexec.exe utility.
D. Run the etl2clog command on all broker nodes by using the mpiexec.exe utility.
Answer: A
Microsoft 070-690 dumps 070-690 070-690 070-690
NO.3 You administer a Windows HPC Server 2008 cluster for your company. You plan to add new nodes to
the cluster by using bare metal provisioning capabilities. You need to ensure the new nodes adhere to
your company naming standards. What should you do?
A. Add a naming series to the head node.
B. Modify the NodeConfigurationFile.xsd file.
C. Modify the NodeInfo.xml file to contain an appropriate name for each node.
D. Create a new node template that contains an appropriate name for each node.
Answer: A
Microsoft 070-690 dumps 070-690 070-690
NO.4 You are deploying a Windows HPC Server 2008 cluster for your company. The cluster head node is
configured with a network topology that has compute nodes isolated on a private network. You want to
add new servers as compute nodes to the cluster. You open the HPC Management Console, start the Add
Node Wizard, and select an option to add compute nodes from an operating system image. You start the
new servers and discover that the wizard is unable to display any of the new servers on the Select New
Nodes page. You need to ensure that the new servers are displayed on the Select New Nodes page of the
wizard. What should you do?
A. Configure the network switches to support the cut-through switching method.
B. Configure Windows Deployment Services on the head node to respond to all preboot execution
environment (PXE) requests.
C. Configure the compute node servers for preboot execution environment (PXE) boot from the NIC that
is connected to the private network.
D. Prestage computer accounts for the new servers in Active Directory Domain Services.
Answer: C
Microsoft dumps 070-690자료 070-690 pdf 070-690최신덤프 070-690
NO.5 You are a system administrator for your company. Your company has deployed a Windows HPC Server
2008 cluster. The HPC nodes are deployed by using a node template that is configured to deploy
Windows HPC Pack on each node. You need to modify the node template so that HPC PowerShell and
the HPC Cluster Manager are installed on the new nodes. What should you do?
A. Install HPC PowerShell and the HPC Cluster Manager on the HPC head node.Recreate the node
template by using the same settings.
B. Add a Run OS Command task to the node template after the Install HPC Pack task.Configure the Run
OS Command task to install the utilities.
C. Add a Unicast Copy task to the node template before the Install HPC Pack task.Configure the Unicast
Copy task to copy HPC PowerShell and the HPC Cluster Manager.
D. Add a Unicast Copy task to the node template to copy the utilities.Add a Run OS Command task to the
node template to install the utilities.Delete the original Install HPC Pack task.
Answer: D
Microsoft 070-690시험문제 070-690 070-690 070-690 dumps 070-690
NO.6 You are a system administrator for your company. Your company deploys a new Windows HPC Server
2008 cluster. The company requires a record of performance information over time. The record must
include link latency and throughput statistics. You need to periodically execute a command that collects
the required information. Which command should you run?
A. ping.exe
B. nltest.exe
C. mpipingpong.exe
D. Get-HPCMetric.ps1
Answer: C
Microsoft 070-690 pdf 070-690 070-690시험문제
NO.7 You administer a Windows HPC Server 2008 cluster. All jobs submitted to the cluster fail. You discover
that the nodes communicate successfully. You need to ensure that the jobs can be submitted successfully.
What should you do first.?
A. Start the HPC Basic Profile Web Service on all nodes.
B. Start the HPC Cluster Manager and enable job Backfilling.
C. Start the HPC Cluster Manager and run the MPI Lightweight throughput test.
D. Start the HPC Cluster Manager and run the job submission diagnostics tool on all nodes.
Answer: D
Microsoft 070-690덤프 070-690
NO.8 You administer a Windows HPC Server 2008 cluster that has 120 compute nodes. The cluster requires
10 additional compute nodes. You manually install Windows Server 2008 Enterprise Edition on 10 new
servers and connect them to the cluster networks. You open HPC Management Console, start the Add
Node Wizard, and select an option to add preconfigured compute nodes. You discover that the wizard is
unable to list any of the new servers. You need to ensure that all the new servers are available for the
wizard. What should you do before you restart the wizard?
A. Install HPC Pack 2008 on the new servers and specify the name of the head node.
B. Create a node template that does not include a step to deploy an operating system image.
C. Configure Windows Deployment Services to respond to all preboot execution environment (PXE)
requests.
D. Move the computer accounts for the new servers in the same organizational unit (OU) that contains the
computer account of the head node.
Answer: A
Microsoft 070-690 dumps 070-690
NO.9 You administer a Windows HPC Server 2008 cluster for your company. You plan to configure a new
node template to deploy the evaluation edition of Windows Server 2008 HPC Edition. You need to ensure
that the deployment of nodes that use the template is successful. What should you do?
A. Add a Tag element to the node XML file. Set the value of the attribute of the Tag element to Evaluation.
B. Add a Template element to the node XML file. Set the value of the Name attribute to Evaluation.
C. Add a Template element to the node XML file. Set the value of the Provisioned attribute to False.
D. Add a Template element to the node XML file. Set the value of the ProductKey attribute to a valid
Windows Server HPC Edition product key.
Answer: D
Microsoft 070-690 pdf 070-690
NO.10 You administer a Windows HPC Server 2008 cluster. You have recently deployed 10 new nodes to the
cluster. Users report that only seven of the new nodes function as part of the cluster. You discover that
three new nodes are in the Unknown state. You need to find out the problem that has prevented the three
nodes from joining the cluster. What should you do?
A. Run the Connectivity diagnostics tool and view the results of the DNS Name Resolution test.
B. Run the Connectivity diagnostics tool and view the results of the Internode Connectivity test.
C. Run the System Configuration diagnostics tool and view the results of the Required Software Updates
test.
D. Run the System Configuration diagnostics tool and view the results of the Application Configuration
test.
Answer: C
Microsoft dump 070-690 070-690 070-690 pdf 070-690
ITexamdump의 CAT-221덤프의 VCE테스트프로그램과 M70-301덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-N37시험에 대비한 고품질 덤프와 E20-553시험 최신버전덤프를 제공해드립니다. 최고품질 70-482시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기