2013년 9월 12일 목요일

HP 인증 HP0-Y21 덤프

ITExamDump의 HP인증 HP0-Y21시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 HP인증 HP0-Y21덤프가 신뢰성을 다시 한번 인증해주는것입니다. HP인증 HP0-Y21시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 HP인증 HP0-Y21덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.

우리 ITExamDump에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리HP HP0-Y21인증시험을 패스하고 싶으시다면 우리 ITExamDump를 장바구니에 넣으시죠 . ITExamDump는 여러분의 아주 좋은 합습가이드가 될것입니다. ITExamDump로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.

ITExamDump에서 제공되는HP HP0-Y21인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 아니 거이 같습니다. 우리ITExamDump의 덤프를 사용한다면 우리는 일년무료 업뎃서비스를 제공하고 또 100%통과 율을 장담합니다. 만약 여러분이 시험에서 떨어졌다면 우리는 덤프비용전액을 환불해드립니다.

ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 HP인증 HP0-Y21덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. HP인증 HP0-Y21덤프는HP인증 HP0-Y21최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.

HP인증 HP0-Y21시험취득 의향이 있는 분이 이 글을 보게 될것이라 믿고ITExamDump에서 출시한 HP인증 HP0-Y21덤프를 강추합니다. ITExamDump의HP인증 HP0-Y21덤프는 최강 적중율을 자랑하고 있어 시험패스율이 가장 높은 덤프자료로서 뜨거운 인기를 누리고 있습니다. IT인증시험을 패스하여 자격증을 취득하려는 분은ITExamDump제품에 주목해주세요.

시험 번호/코드: HP0-Y21
시험 이름: HP (ProCurve Core Competencies)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 79 문항
업데이트: 2013-09-11

HP0-Y21 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y21.html

NO.1 What is the default username and password for the ProCurve Manager Management Server?
A. username: Manager
password: password
B. username: Administrator
password: admin
C. username: Manager
password: value configured during installation
D. username: Administrator
password: value configured during installation
E. username: value configured during installation
password: value configured during installation
Answer: D

HP   HP0-Y21   HP0-Y21

NO.2 Which methods are used by ProCurve Manager Plus to discover manageable devices? (Select three.)
A. scans TCP ports
B. pings to detect replies
C. scans for ProCurve SNMP identifiers
D. reads ARP table
E. tests for Telnet access
F. listens for LLDP messages
Answer: BDF

HP   HP0-Y21 pdf   HP0-Y21   HP0-Y21   HP0-Y21기출문제

NO.3 while installing ProCurve Manager Server, you specify 192.168.1.1 as the "Start from device." This
device is a ProCurve Switch 5406zl with IP routing and RIP enabled. The switch has interfaces in four IP
networks, including 192.168.1.0/24.
Which ProCurve devices will be automatically discovered by ProCurve Manager?
A. devices in the 5406zl LLDP neighbor table
B. devices in the 192.168.1.0/24 network
C. devices in all networks in the 5406zl route table
D. devices in all networks directly connected to the 5406zl
Answer: B

HP   HP0-Y21   HP0-Y21   HP0-Y21기출문제

NO.4 What is the effect of entering the following command at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-100)#interface a1
A. Port A1 is enabled.
B. The CLI enters the configuration context for port A1.
C. Port A1 becomes a tagged member of VLAN 100.
D. The CLI displays the status of port A1.
Answer: B

HP   HP0-Y21   HP0-Y21   HP0-Y21자격증

NO.5 Which authentication methods are supported by the SSH service on ProCurve switches? (Select
three.)
A. MAC-Auth
B. 802.1X
C. Kerberos
D. local user name and password
E. public key
F. RADIUS
Answer: DEF

HP시험문제   HP0-Y21시험문제   HP0-Y21 dump   HP0-Y21자격증   HP0-Y21

NO.6 You must define a hostname on a ProCurve Switch 5406zl. Which configuration context must you enter
to perform this task?
A. manager
B. interface configuration
C. operator
D. global configuration
Answer: D

HP   HP0-Y21   HP0-Y21덤프   HP0-Y21덤프   HP0-Y21

NO.7 Which features are available in ProCurve Manager Plus, but not in ProCurve Manager? (Select two.)
A. alerts notification
B. automatic discovery
C. network topology mapping
D. scheduled software updates
E. CLI device management
F. traffic analysis
Answer: DF

HP기출문제   HP0-Y21   HP0-Y21시험문제   HP0-Y21기출문제

NO.8 In ProCurve Manager Plus, which user type can configure and manage network devices but cannot
add, delete, or modify user accounts?
A. operator
B. viewer
C. manager
D. administrator
Answer: A

HP   HP0-Y21 pdf   HP0-Y21   HP0-Y21자격증   HP0-Y21

NO.9 Which ProCurve Manager wizard simplifies the task of changing the SNTP server IP address
parameter on 50 ProCurve 5406zl switches?
A. CLI Wizard
B. Switch Update Wizard
C. Configuration Wizard
D. IP Networking Wizard
E. Network Services Wizard
Answer: A

HP   HP0-Y21   HP0-Y21

NO.10 while installing ProCurve Manager Server, you specify 192.168.1.1 as the "Start from device." This
device is a ProCurve Switch 5406zl with IP routing and RIP enabled. The switch has interfaces in four IP
networks, including 192.168.1.0/24.
Which step must be taken to enable ProCurve Manager to discover devices in networks other than
192.168.1.0/24?
A. Perform a Manual Discovery for each VLAN configured on the 5406zl.
B. Import the subnet address ranges from the 5406zl routing table.
C. Configure ProCurve Manager to receive SNMP traps from devices in the networks.
D. Add the other networks to the Managed Subnets list in Discovery Preferences.
Answer: D

HP   HP0-Y21자격증   HP0-Y21 dump   HP0-Y21

NO.11 You must configure a ProCurve switch to help protect a customer network from malicious users who
might attempt to exhaust the address pool of the company's DHCP server. Which ProCurve feature will
help to address this vulnerability?
A. DHCP snooping
B. Dynamic ARP protection
C. built-in DHCP server
D. DHCP relay
Answer: A

HP   HP0-Y21   HP0-Y21최신덤프

NO.12 Which statement is correct about the discovery features of ProCurve Manager (PCM) with ProCurve
Manager Plus (PCM+)?
A. PCM+ enables the scheduling of auto-discovery; PCM requires users to initiate discovery manually.
B. PCM+ and PCM use identical discovery processes.
C. PCM+ supports discovery based on LLDP, CDP and FDP; PCM supports discovery based only on
CDP and FDP.
D. PCM+ will discover devices from manufacturers other than HP; PCM will only discover ProCurve
devices.
Answer: B

HP시험문제   HP0-Y21인증   HP0-Y21자격증

NO.13 You must enable IP routing at the CLI of a ProCurve Switch 3500yl, but can remember only that the
command begins with "ip." Which command provides context-sensitive help?
A. 3500yl# ip[ENTER]
B. 3500yl# ip/?[ENTER]
C. 3500yl# help ip[ENTER]
D. 3500yl# ip?[ENTER]
E. 3500yl# ip[TAB]
Answer: E

HP   HP0-Y21자료   HP0-Y21   HP0-Y21자료   HP0-Y21 dump

NO.14 Which methods can be used to update the ProCurve Switch 5412zl software using the CLI? (Select
two.)
A. FTP over IP connection
B. TFTP over serial port connection
C. direct serial port transfer
D. TFTP over IP connection
E. SNMPv3 transfer over IP connection
Answer: CD

HP pdf   HP0-Y21   HP0-Y21시험문제   HP0-Y21시험문제

NO.15 Which configuration and monitoring interfaces are available when you access a ProCurve switch
through Telnet? (Select two.)
A. menu interface
B. ProCurve Manager
C. command line interface
D. boot monitor interface
E. web interface
Answer: AC

HP   HP0-Y21   HP0-Y21

NO.16 Which ports configured on a ProCurve switch are equivalent to the access ports on a Cisco Systems
switch?
A. edge ports
B. LAG ports
C. untagged ports
D. tagged ports
Answer: C

HP   HP0-Y21   HP0-Y21   HP0-Y21 pdf   HP0-Y21

NO.17 What is the effect of the following command issued at the CLI of a ProCurve Switch 5406zl?
ProCurve Switch 5406zl# configure terminal
A. The CLI moves to the global configuration context.
B. The CLI echoes user input to the terminal.
C. The CLI displays current configuration parameters.
D. The CLI provides an interface for configuring terminal variables such as line length.
Answer: A

HP자격증   HP0-Y21   HP0-Y21인증

NO.18 Which VLAN configuration parameters must be reviewed when a network user group relocates to an
office facility with a new network setup? (Select two.)
A. VLAN membership for other workstations in the group's new facility
B. VLAN membership for the switch ports that will provide connectivity for the group's workstations
C. IP addressing for the default VLAN on the switch that will provide connectivity for the group's
workstations
D. VLAN membership for the uplink port on the switch that will provide connectivity between the group
and resources connected to other switches
E. VLAN membership of the default gateway on the switch that will provide connectivity for the group's
workstations
Answer: BD

HP   HP0-Y21   HP0-Y21   HP0-Y21   HP0-Y21

NO.19 At a customer site, a network technician notices that a device deleted from the Navigation Pane in
ProCurve Manager Plus (PCM+) reappears after two days. How can the technician prevent this behavior?
A. Disable LLDP on the device.
B. Delete the device's subnet from the Managed Subnets list.
C. Configure PCM+ discovery options to ignore the device's VLAN.
D. Add the device to the Excluded Devices list.
Answer: D

HP   HP0-Y21   HP0-Y21시험문제   HP0-Y21

NO.20 You configured untagged port members of VLAN 10 and VLAN 20 on a ProCurve Switch 8212zl.
Additionally, you assigned IP addresses to interfaces in both VLANs. While testing the configuration, you
discover that nodes in the two VLANs cannot ping each other. The nodes are configured correctly and
connected to the correct ports.
What must be done on the 8212zl to enable communication between the nodes?
A. Disable ICMP blocking.
B. Enable IP routing.
C. Add connected ports to both VLANs.
D. Define a default gateway.
Answer: B

HP자료   HP0-Y21   HP0-Y21   HP0-Y21

NO.21 Which statement is correct about the support for LLDP offered by ProCurve switches?
A. The LLDP neighbors table contains the system names and MAC addresses of neighbors.
B. LLDP is a reciprocal protocol that provides acknowledgement for each packet transmitted.
C. LLDP is globally disabled by default to avoid any performance impact.
D. When routing is enabled, LLDP is automatically disabled because LLDP messages cannot be
transmitted over routed interfaces.
Answer: A

HP   HP0-Y21   HP0-Y21   HP0-Y21

NO.22 What is the effect of issuing the following command at the CLI of a ProCurve Switch 5406zl?
ProCurve Switch 5400zl(config)# include-credentials
A. Management passwords and user names will be displayed in the running configuration.
B. Local management user names and passwords will be stored on the configured RADIUS server.
C. The switch will send and require authentication information for all SNMP communications.
D. User names and passwords will be required for all management access.
Answer: A

HP   HP0-Y21 dump   HP0-Y21기출문제   HP0-Y21인증

NO.23 A ProCurve Switch 8212zl must be configured to be the ABR for OSPF areas 0 and 5. While
implementing this configuration, you enter the following command at the switch's CLI:
8212.l(ospf)#area 5 stub 2 no-summary
How will this affect the route tables of other routers in area 5?
A. Only directly connected routes will be listed.
B. Every route known to the 8212zl will be listed with a separate gateway and cost.
C. The only OSPF route will be the interface with the 8212zl.
D. All networks outside area 5 will be summarized as a default route.
Answer: D

HP   HP0-Y21   HP0-Y21   HP0-Y21시험문제   HP0-Y21

NO.24 Click the Exhibit button.
Which command enables the ProCurve Switch 3500yl-24G to execute the config2 configuration file
shown in the exhibit?
A. erase config1
B. copy config2 flash primary
C. config active config2
D. boot system flash secondary
Answer: D

HP인증   HP0-Y21 dump   HP0-Y21   HP0-Y21

NO.25 You must configure password protection for read/write access to the CLI of a ProCurve switch. Which
command is necessary to complete this task?
A. ProCurve Switch 5304XL(config)# password operator
B. ProCurve Switch 5304XL(config)# password manager
C. ProCurve Switch 5304XL(config)# password administrator
D. ProCurve Switch 5304XL(config)# password port-access
Answer: B

HP인증   HP0-Y21   HP0-Y21시험문제

NO.26 You must specify network management parameters for ProCurve switches scheduled to be installed
at a customer site. Which two features are offered by SNMPv3, but are not offered by SNMPv1 or
SNMPv2c? (Select two.)
A. configurable trap receiver ports
B. TCP-based message flow control
C. access control based on IP address or DNS name
D. encrypted communications
E. access restrictions based on user identity
Answer: DE

HP pdf   HP0-Y21기출문제   HP0-Y21   HP0-Y21   HP0-Y21

NO.27 Which privilege level is indicated by this prompt in the CLI of a ProCurve switch?
Switch_1A#
A. manager
B. operator
C. global configuration
D. viewer
Answer: A

HP   HP0-Y21자격증   HP0-Y21   HP0-Y21자료   HP0-Y21

NO.28 Which steps are necessary before enabling SSL on a ProCurve switch? (Select two.)
A. Generate an HTTPS client certificate.
B. Import a certificate from a Certificate Authority.
C. Generate a self-signed server certificate.
D. Disable unencrypted Web-based management.
E. Generate public and private keys.
Answer: CE

HP기출문제   HP0-Y21   HP0-Y21   HP0-Y21 pdf   HP0-Y21 dumps

NO.29 Which command, entered at the CLI of a ProCurve switch, saves the switch's running configuration to
its startup configuration?
A. write config
B. save startup-config
C. write memory
D. save running-config
E. copy running-config startup-config
Answer: C

HP   HP0-Y21   HP0-Y21인증   HP0-Y21   HP0-Y21최신덤프

NO.30 Port a1 on a ProCurve Switch 5406zl is a tagged member of VLAN 20. Which devices can
communicate through this port? (Select two.)
A. a port on another switch that is a tagged member of VLAN 20
B. a port on another switch that is an untagged member of VLAN 20
C. an end station that cannot insert or remove 802.1Q tags
D. a port on another switch that cannot insert or remove 802.1Q tags
E. an 802.1Q-compliant end station that is a member of VLAN 20
Answer: AE

HP인증   HP0-Y21   HP0-Y21   HP0-Y21   HP0-Y21   HP0-Y21 dumps

ITexamdump의 70-688덤프의 VCE테스트프로그램과 1z0-457덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-959시험에 대비한 고품질 덤프와 C_TFIN52_64시험 최신버전덤프를 제공해드립니다. 최고품질 1z0-559시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HP0-Y21.html

댓글 없음:

댓글 쓰기