HP인증HP0-S13시험을 위하여 최고의 선택이 필요합니다. ITExamDump 선택으로 좋은 성적도 얻고 하면서 저희 선택을 후회하지 않을것니다.돈은 적게 들고 효과는 아주 좋습니다.우리ITExamDump여러분의 응시분비에 많은 도움이 될뿐만아니라HP인증HP0-S13시험은 또 일년무료 업데이트서비스를 제공합니다.작은 돈을 투자하고 이렇게 좋은 성과는 아주 바람직하다고 봅니다.
IT인증시험덤프자료를 제공해드리는 사이트는 너무나도 많습니다. 그중에서 대부분 분들이ITExamDump제품에 많은 관심과 사랑을 주고 계시는데 그 원인은 무엇일가요?바로ITExamDump에서 제공해드리는 덤프자료 품질이 제일 좋고 업데이트가 제일 빠르고 가격이 제일 저렴하고 구매후 서비스가 제일 훌륭하다는 점에 있습니다. ITExamDump 표 HP인증HP0-S13덤프를 공부하시면 시험보는데 자신감이 생기고 시험불합격에 대한 우려도 줄어들것입니다.
시험 번호/코드: HP0-S13
시험 이름: HP ( HP BladeSystem Class Solutions I)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 151 문항
업데이트: 2013-09-11
인테넷에 검색하면 HP HP0-S13시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의HP HP0-S13제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.
HP HP0-S13인증시험에 응시하고 싶으시다면 좋은 학습자료와 학습 가이드가 필요합니다.HP HP0-S13시험은 it업계에서도 아주 중요한 인증입니다. 시험패스를 원하신다면 충분한 시험준비는 필수입니다.
HP0-S13 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-S13.html
NO.1 To utilize all four Ethernet ports on the NC325m PCIe Quad-Port 1Gb Server Adapter, which
mezzanine position must you avoid?
A. mezzanine position 1 in full-height server blades
B. mezzanine position 2 in full-height server blades
C. mezzanine position 3 in full-height server blades
D. mezzanine position 1 in half-height server blades
E. mezzanine position 2 in half-height server blades
Answer: D
HP HP0-S13 HP0-S13최신덤프 HP0-S13최신덤프
NO.2 Which statements are true when using the HP StorageWorks SB40c storage blade for c-Class?
(Select three.)
A. Each SB40c storage blade can partner with only one server blade.
B. A c7000 enclosure can have a maximum of eight SB40c storage blades.
C. The SB40c storage blade supports Serial Attached SCSI (SAS) drives only.
D. A full-height storage blade can connect to a maximum of two SB40c storage blades.
E. Each SB40c storage blade requires an HP PCI Express Mezzanine Pass-Thru card to be installed in
mezzanine slot 3 of the full-height storage blade.
F. If connecting both the SB40c storage blade and the Ultrium 448c tape blade to the same full-height
server blade, the SB40c storage blade must be installed in the top bay.
Answer: ABE
HP인증 HP0-S13덤프 HP0-S13
NO.3 Which statements describe the function of the Onboard Administrator? (Select two.)
A. It enables automated provisioning of the HP BladeSystem c-Class server blades.
B. It provides I2C and ICMB management interfaces to all HP BladeSystem c-Class components.
C. It consolidates 16 iLO 2 ports in the c7000 enclosure and 8 iLO 2 ports in the c3000 enclosure.
D. It creates a LAN-based or SAN-based abstraction layer between the server blades and the external
LAN/SAN.
Answer: BC
HP자료 HP0-S13덤프 HP0-S13 HP0-S13 HP0-S13
NO.4 How can the Onboard Administrator show a health status different from the status displayed by HP
Systems Insight Manager (HP SIM)? (Select two.)
A. The passive Onboard Administrator might have been activated through the user interface without
notifying HP SIM.
B. The active Onboard Administrator status does not include information from the agents running on the
server blades.
C. The active Onboard Administrator might indicate a failure that HP SIM displays in the event log rather
than in the health status.
D. The passive Onboard Administrator does not send a trap to HP SIM indicating a change of state when
it activates after a failure.
E. Because of an Integrated Lights-Out (iLO) configuration error, iLO might have indicated different health
states to the Onboard Administrator and to HP SIM.
Answer: BC
HP HP0-S13 HP0-S13 HP0-S13시험문제 HP0-S13자격증
NO.5 Click the Exhibit button.
In a four-fan configuration, where must these fans be installed?
A. bays 1, 2, 3, and 4
B. bays 1, 2, 3, and 5
C. bays 2, 4, 5, and 6
D. bays 3, 4, 5, and 6
Answer: C
HP HP0-S13 HP0-S13 HP0-S13 HP0-S13덤프
NO.6 Which role-based Virtual Connect Manager access enables you to create, edit, and delete Virtual
Connect profiles?
A. Server
B. Admin
C. Storage
D. Domain
E. Networking
Answer: A
HP HP0-S13기출문제 HP0-S13
NO.7 Which types of drives are supported by the HP BladeSystem c-Class storage blades? (Select two.)
A. SCSI
B. Serial ATA (SATA)
C. Parallel ATA (PATA)
D. Serial Attached SCSI (SAS)
E. Fibre Attached Technology Adapted (FATA)
Answer: BD
HP HP0-S13인증 HP0-S13 HP0-S13덤프
NO.8 Which HP software is included with Insight Control Data Center Edition (ICDCE) and can be installed
as an option in the ICDCE installation but must be licensed separately? (Select two.)
A. Server Migration Pack (SMP)
B. Remote Support Pack (RSP)
C. Virtual Machine Management (VMM) Pack
D. Vulnerability and Patch Management (VPM) Pack
Answer: AC
HP HP0-S13인증 HP0-S13 HP0-S13 dumps
NO.9 Which HP BladeSystem c-Class components are covered by the HP 3-year parts, 3-year labor, and
3-year on-site limited global warranty? (Select three.)
A. server blades
B. c7000 enclosures
C. c3000 enclosures
D. SAS and SATA disk drives
E. Ethernet and SAN interconnect switches
F. Ethernet and Fibre Channel Pass-Thru modules
Answer: ABC
HP시험문제 HP0-S13 HP0-S13자료 HP0-S13
NO.10 What are the features of the HP Customer Self-Repair program? (Select three.)
A. HP ships the replacement part directly to the customer.
B. The customer is responsible for replacing the faulty part.
C. HP ships the replacement part to an authorized partner closest to the customer.
D. The customer diagnoses the issue and determines whether a replacement part is required.
E. The program is available for HP products that are under warranty but not covered by a service
contract.
F. An HP support specialist diagnoses the problem and determines whether a replacement part is
necessary.
Answer: ABF
HP HP0-S13 HP0-S13 HP0-S13 pdf
NO.11 From which sources can you configure individual iLO management processors? (Select three.)
A. from an FTP server
B. through a scripted setup
C. from the HP Management CDROM
D. through virtual Keyboard/Video/Monitor (KVM)
E. remotely through a browser-based Web interface
F. locally using the ROM-Based Setup Utility (RBSU)
Answer: BEF
HP기출문제 HP0-S13 dump HP0-S13 HP0-S13 dumps HP0-S13 pdf
NO.12 Which statements correctly describe the integrated management functionality of HP SIM and HP
BladeSystem c-Class environments? (Select three.)
A. The redundant Onboard Administrator module cannot automatically take over control of the enclosure
until the primary Onboard Administrator module fails.
B. For added security, you must specify your user name and password when accessing the server blade
iLOs from the Onboard Administrator GUI.
C. The Onboard Administrator includes status information from the server blade agents and therefore
displays the same server blade status in its GUI as HP SIM.
D. HP SIM reports the Onboard Administrator modules, server blades, and server blade iLOs separately
because each has its own IP address and its own instrumentation.
E. Both the primary and redundant Onboard Administrator modules share the same IP address, thereby
enabling transparent failover for HP SIM and other management clients.
F. You can change which Onboard Administrator module is active and which is standby by logging in to
the standby Onboard Administrator module user interface and changing its setting.
Answer: ADF
HP HP0-S13자격증 HP0-S13 HP0-S13
NO.13 Which functions does the Onboard Administrator perform in the BladeSystem c-Class? (Select two.)
A. It manages connections to the interconnect modules.
B. It activates Remote Deployment Pack (RDP) when an in-service server fails.
C. It automates the process of deploying server operating systems and software.
D. It drives all management features through the Inter-Integrated Circuit (I2C) and Intelligent Chassis
Management Bus (ICMB) interfaces.
Answer: AD
HP HP0-S13 HP0-S13 HP0-S13 dumps HP0-S13
NO.14 You are configuring the MSA1000 storage solution to boot from a SAN. Although there are several
physical drives reported in the ACU graphical user interface, the Selective Storage Presentation (SSP)
link is missing. Why?
A. The ACU has detected multiple paths from the host.
B. The MSA1000 does not have any logical drives defined.
C. An incorrect MSA1000 device driver is loaded in the host server.
D. The host server is not running the HP Insight Agents, or these agents are outdated.
Answer: B
HP HP0-S13 HP0-S13 HP0-S13자격증 HP0-S13
NO.15 Which statements are true regarding the HP StorageWorks Ultrium 448c Tape Blade? (Select three.)
A. The tape blade provides direct-attach data protection for the adjacent server blade.
B. The tape blade provides network backup protection for all data within the enclosure.
C. The tape blade installs in a full-height device bay of either the c3000 or c7000 enclosure.
D. The tape blade installs in a half-height device bay of either the c3000 or c7000 enclosure.
E. The tape blade and the SB40c storage blade can both partner with the same full-height server blade.
F. The tape blade can partner with any of the HP BladeSystem c-Class ProLiant or Integrity server blades.
Answer: ABD
HP시험문제 HP0-S13 pdf HP0-S13 HP0-S13인증 HP0-S13
NO.16 Which statement correctly describes Insight Control Data Center Edition (ICDCE)?
A. all-in-one Linux-hosted blade management and deployment software package
B. integrated suite of software that simplifies the provisioning, management, and recovery of
BladeSystem infrastructures
C. HP SIM 5.1 plug-in that adds remote monitoring and warranty, HP Care Pack, and contract entitlement
features to HP SIM
D. server deployment solution that facilitates the installation, configuration, and deployment of
high-volumes of servers through either a GUI-based or a Web-based console, using either scripting or
imaging technology
Answer: B
HP HP0-S13인증 HP0-S13
NO.17 Which statements are true regarding the BladeSystem? (Select two.)
A. BladeSystem c-Class and p-Class server blades will not ship until 2009.
B. The c-Class interconnects are compatible with the p-Class interconnects at a management interface
level.
C. c-Class server blades can be installed in a p-Class enclosure with an enclosure upgrade kit.
D. p-Class and c-Class server blades are compatible with industry-standard Web Based Enterprise
Management (WBEM).
E. The Onboard Administrator can manage both p-Class and c-Class enclosures.
Answer: BD
HP덤프 HP0-S13자격증 HP0-S13최신덤프 HP0-S13 HP0-S13덤프
NO.18 Ten fans are installed in a fully populated c7000 enclosure and are configured as AC Redundant. All
server blades are powered on. What happens if one fan fails? (Select three.)
A. The fan subsystem health status remains OK.
B. The health LED of the failed fan illuminates red.
C. The health LED of the failed fan illuminates solid amber.
D. The fan subsystem health status changes to FAILED.
E. The fan subsystem health status changes to DEGRADED.
F. The Onboard Administrator increases the fan RPM to maximum.
G. The Onboard Administrator begins to shut down the least active server blades.
Answer: CEF
HP HP0-S13자료 HP0-S13인증
NO.19 Which statements describe how the Integrated Lights-Out (iLO) management processor receives its
power in the HP BladeSystem c-Class enclosure? (Select two.)
A. iLO receives its power through a connection to the server.
B. iLO receives its power through an independent connection.
C. iLO can be activated through Virtual Power from a remote server.
D. iLO receives redundant power in the event of a power supply failure.
E. iLO can be activated even if the server is not connected to a power source.
Answer: BD
HP dump HP0-S13 dumps HP0-S13최신덤프 HP0-S13기출문제
NO.20 How will the HP BladeSystem c-Class enclosures indicate if a server blade is not installed in the correct
device bay?
A. The HP BladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the enclosure to power on.
D. The Onboard Administrator will not allow the interconnects to power on.
E. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: E
HP HP0-S13최신덤프 HP0-S13자격증 HP0-S13 HP0-S13자격증
ITexamdump의 BAS-013덤프의 VCE테스트프로그램과 000-089덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-461시험에 대비한 고품질 덤프와 HH0-240시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-690시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기