인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.
LSI L50-501인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.LSI L50-501시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는LSI L50-501관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸LSI L50-501관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게LSI L50-501응시하는데 많은 도움이 될 것입니다.
ITExamDump 에서는 최선을 다해 여러분이LSI L50-501인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서LSI L50-501덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로LSI L50-501인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.
ITExamDump는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.
다른 사이트에서도LSI L50-501인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 ITExamDump의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론ITExamDump을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한ITExamDump를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.
ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이LSI인증L50-501시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이LSI인증L50-501시험에 대한 부담은 사라질 것입니다.
시험 번호/코드: L50-501
시험 이름: LSI (LSI SVM5 Implementation Engineer)
ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 LSI인증L50-501시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 LSI인증L50-501덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
L50-501 덤프무료샘플다운로드하기: http://www.itexamdump.com/L50-501.html
NO.1 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D
LSI L50-501 L50-501 L50-501
NO.2 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D
LSI L50-501 L50-501기출문제 L50-501
NO.3 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C
LSI L50-501 L50-501 L50-501
NO.4 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B
LSI자료 L50-501 L50-501 L50-501자료
NO.5 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D
LSI기출문제 L50-501덤프 L50-501 dump L50-501덤프 L50-501
NO.6 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B
LSI인증 L50-501기출문제 L50-501 L50-501
NO.7 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C
LSI자격증 L50-501 dump L50-501자료 L50-501 L50-501
NO.8 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B
LSI L50-501 L50-501 L50-501
NO.9 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C
LSI인증 L50-501 L50-501
NO.10 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C
LSI시험문제 L50-501 L50-501
NO.11 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A
LSI인증 L50-501시험문제 L50-501 L50-501 L50-501
NO.12 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B
LSI L50-501시험문제 L50-501 L50-501 L50-501덤프
NO.13 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C
LSI L50-501 dump L50-501인증
NO.14 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A
LSI L50-501덤프 L50-501자료
NO.15 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B
LSI L50-501덤프 L50-501 dumps L50-501인증
IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의LSI인증 L50-501덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된LSI인증 L50-501덤프를 1년간 무료로 업데이트서비스를 드립니다.
댓글 없음:
댓글 쓰기