SAP C-TBIT44-71 덤프자료

SAP C-TBIT44-71인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만C-TBIT44-71시험은SAP인증의 아주 중요한 시험으로서C-TBIT44-71시험패스는 쉬운 것도 아닙니다.

ITExamDump의 SAP인증 C-TBIT44-71덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 SAP인증 C-TBIT44-71덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 SAP인증 C-TBIT44-71로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.

ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여SAP C-TBIT44-71관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리SAP C-TBIT44-71도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.

ITExamDump의 SAP인증 C-TBIT44-71시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 SAP인증 C-TBIT44-71덤프가 신뢰성을 다시 한번 인증해주는것입니다. SAP인증 C-TBIT44-71시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 SAP인증 C-TBIT44-71덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.

시험 번호/코드: C-TBIT44-71
시험 이름: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-01-23

C-TBIT44-71 덤프무료샘플다운로드하기: http://www.itexamdump.com/C-TBIT44-71.html

NO.1 You can create multiple configurations for one Integration Process without changing the
appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D

SAP자료   C-TBIT44-71기출문제   C-TBIT44-71기출문제   C-TBIT44-71인증

NO.2 A special aspect in B2B business processes is that the business partners involved in
these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D

SAP dumps   C-TBIT44-71 dump   C-TBIT44-71기출문제

NO.3 Which statements are correct when using the Receiver File adapter to process XML
messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C

SAP   C-TBIT44-71덤프   C-TBIT44-71자격증

NO.4 To react to situations where it is not possible or not advisable to continue a process in
the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error
occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D

SAP   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71

NO.5 The communication between the Integration Server and the backend applications can
be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B

SAP   C-TBIT44-71시험문제   C-TBIT44-71최신덤프   C-TBIT44-71

NO.6 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B

SAP자격증   C-TBIT44-71덤프   C-TBIT44-71자료   C-TBIT44-71   C-TBIT44-71

NO.7 You have implemented a scenario where IDocs are posted to an ERP system using the
receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'
functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target
system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best
effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E

SAP시험문제   C-TBIT44-71   C-TBIT44-71

NO.8 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B

SAP   C-TBIT44-71   C-TBIT44-71시험문제   C-TBIT44-71

NO.9 You have created a deadline branch. When the deadline has expired, the integration
process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert
to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A

SAP인증   C-TBIT44-71자료   C-TBIT44-71   C-TBIT44-71

NO.10 For the delivery mode of an integration process, you can choose between inbound
processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a
message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step
available to receive
an incoming message, the message is buffered in a separate, process-instance-specific
queue.
Answer: B,C,D

SAP자격증   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71

NO.11 The PI Mail adapter is used to send and receive emails. Which protocols are
supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D

SAP   C-TBIT44-71   C-TBIT44-71시험문제

NO.12 If a system error occurs in a send step, an alert can be triggered for Alert Management
and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B

SAP기출문제   C-TBIT44-71최신덤프   C-TBIT44-71

NO.13 Assume that your customer has a scenario in which a database table needs to be
queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C

SAP인증   C-TBIT44-71   C-TBIT44-71자격증   C-TBIT44-71자료

NO.14 You configure the sender RFC adapter to convert RFC calls from a sender to XML
messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the
configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B

SAP시험문제   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71 dump   C-TBIT44-71자격증

NO.15 You are implementing an IDoc-based scenario using SAP Netweaver PI and more
specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the
SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration
Server client.
Answer: A,B,D

SAP   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71기출문제

ITexamdump의 BAS-004덤프의 VCE테스트프로그램과 000-955덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-466시험에 대비한 고품질 덤프와 MB6-870시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-B25시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/C-TBIT44-71.html