Cisco인증 642-457시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은ITExamDump 의 Cisco인증 642-457덤프를 알고 계시는지요? ITExamDump 의 Cisco인증 642-457덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.
ITExamDump의 Cisco인증 642-883시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Cisco인증 642-883덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Cisco인증 642-883시험을 통과하여 자격증을 취득하려면ITExamDump의 Cisco인증 642-883덤프로 시험준비공부를 하세요.
안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미Cisco 642-457인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의Cisco 642-457문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Cisco 642-457인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.
시험 이름: Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 642-457 Dumps
100% 합격율 보장
Q&A: 188 문항 642-457기출문제
업데이트: 2014-07-01
642-457 Dumps: >>펼쳐보기
시험 이름: Deploying Cisco Service Provider Network Routing (SPROUTE)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 642-883후기
100% 합격율 보장
Q&A: 82 문항 642-883국제자격증
업데이트: 2014-07-01
642-883후기: >>펼쳐보기
ITExamDump의Cisco인증 642-457시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. Cisco인증 642-457덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.
Cisco인증 642-883시험은 등록하였는데 시험준비는 아직이라구요? Cisco인증 642-883시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Cisco인증 642-883덤프와의 근사한 만남이Cisco인증 642-883패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Cisco인증 642-883덤프로 시험패스에 고고싱하세요.
우리 ITExamDump사이트에서 제공되는Cisco인증642-883시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Cisco인증642-883시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
ITExamDump의 경험이 풍부한 전문가들이Cisco 642-457인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.Cisco 642-457인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전Cisco 642-457인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.
642-883 덤프무료샘플다운로드하기: http://www.itexamdump.com/642-883.html
NO.1 Refer to the OSPF command exhibit.
Which effect does the no-summary command option have?
A. It will cause area 1 to be able to receive non-summarized inter-area routes.
B. It will cause area 1 to not receive any inter-area routes and will use a default route to reach networks in
other areas.
C. It will cause area 1 to not receive any external routes and will use a default route to reach the external
networks.
D. It will convert the NSSA area into a NSSA totally stubby area.
E. It will convert the stubby area into a NSSA.
F. It will disable OSPF auto-summary.
Answer: B
Cisco자료 642-883시험후기 642-883덤프 642-883기출문제
NO.2 Which three statements are true regarding the OSPF router ID? (Choose three.)
A. The OSPF routing process chooses a router ID for itself when it starts up.
B. The router-id command is the preferred procedure to set the router ID.
C. If a loopback interface is configured, its address will always be preferred as the router ID over any
other methods.
D. After the router ID is set, it does not change, even if the interface that the router is using for the router
ID goes down. The router ID changes only if the router reloads or if the OSPF routing process restarts.
E. In OSPF version 3, the OSPF router ID uses a 128-bit number.
Answer: A,B,D
Cisco기출문제 642-883자격증신청 642-883 IT자격증시험 642-883 642-883시험문제
NO.3 When troubleshooting OSPF neighbor errors, which three verification steps should be considered.?
(Choose three.)
A. Verify if neighboring OSPF interfaces are configured in the same area.
B. Verify if neighboring OSPF interfaces are configured with the same OSPF process ID.
C. Verify if neighboring OSPF interfaces are configured with the same OSPF priority.
D. Verify if neighboring OSPF interfaces are configured with the same hello and dead intervals.
E. Verify if neighboring OSPF interfaces are configured with the same area type.
Answer: A,D,E
Cisco자격증 642-883인증 642-883 642-883 642-883 642-883시험자료
NO.4 What is function of the RP/0/RSP0/CPU0:PE1(config-ospf)#distance Cisco IOS-XR command?
A. To modify the administrative distance of the OSPF routes
B. To modify the default seed metric of the OSPF external routes
C. To modify the OSPF default reference bandwidth
D. To modify the OSPF cost
Answer: A
Cisco시험문제 642-883교육 642-883최신덤프 642-883 IT자격증시험 642-883교재 642-883기출문제
NO.5 On Cisco IOS XR Software, which set of commands is used to enable the gi0/0/0/1 interface for OSPF
in area 0?
A. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0
B. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 255.255.255.255
area 0
C. router ospf 1 area 0 interface GigabitEthernet0/0/0/1
D. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ip ospf 1 area 0
E. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
F. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
Answer: C
Cisco인증 642-883자격증 642-883국제공인자격증 642-883최신덤프 642-883교재
NO.6 In comparing IS-IS with OSPF, a Level-1-2 IS-IS router is similar to which kind of OSPF router?
A. ASBR on a normal OSPF area
B. ASBR on NSSA
C. ABR on totally stubby OSPF area
D. ABR on stubby OSPF area
E. ABR on a normal OSPF area
Answer: C
Cisco 642-883최신덤프 642-883 642-883강좌 642-883시험문제
NO.7 When configuring IPv4 and IPv6 IS-IS routing on Cisco IOS XR routers, which three statements are
correct? (Choose three.)
A. By default, a single SPF is used for both IPv4 and IPv6, so the IPv4 and IPv6 topology should be the
same.
B. By default, the IS-IS router type is Level 1 and Level 2.
C. All IS-IS routers within the same IS-IS area must be configured with the same IS-IS routing process
instance ID.
D. By default, metric-style narrow is used.
E. By default, the IS-IS interface circuit type is Level 1 and Level 2.
F. The area IS-IS address-family configuration command is used to specify the IS-IS area address.
Answer: B,D,E
Cisco자격증시험 642-883 IT자격증 642-883자격시험 642-883 IT자격증시험자료 642-883 642-883자격증
NO.8 Which two OSPF network scenarios require OSPF virtual link configuration? (Choose two.)
A. to connect an OSPF non-backbone area to area 0 through another non-backbone area
B. to connect an NSSA area to an external routing domain
C. to connect two parts of a partitioned backbone area through a non-backbone area
D. to enable route leaking from Level 2 into Level 1
E. to enable route leaking from Level 1 into Level 2
F. to enable OSPF traffic engineering
Answer: A,C
Cisco덤프 642-883 Dumps 642-883 IT덤프 642-883응시료 642-883
댓글 없음:
댓글 쓰기