CheckPoint 자격증 156-315.71 시험덤프

발달한 네트웨크 시대에 인터넷에 검색하면 많은CheckPoint인증 156-315.71시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의CheckPoint인증 156-315.71시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의CheckPoint인증 156-315.71 실제시험 문제를 연구하여 만든CheckPoint인증 156-315.71덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의CheckPoint인증 156-315.71덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.

ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. CheckPoint인증 156-315.71덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이CheckPoint인증 156-315.71덤프 적중율과 패스율은 100% 보장해드립니다. CheckPoint인증 156-315.71시험에 도전하려는 분들은ITExamDump 의CheckPoint인증 156-315.71덤프로 시험을 준비할것이죠?

CheckPoint인증 156-315.71시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. CheckPoint인증 156-315.71시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 CheckPoint인증 156-315.71덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 CheckPoint인증 156-315.71시험적중율이 최고입니다. CheckPoint인증 156-315.71시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.

CheckPoint인증 156-315.71시험을 어떻게 패스할가 고민그만하고ITExamDump의CheckPoint 인증156-315.71시험대비 덤프를 데려가 주세요.가격이 착한데 비해 너무나 훌륭한 덤프품질과 높은 적중율, ITExamDump가 아닌 다른곳에서 찾아볼수 없는 혜택입니다.

시험 번호/코드: 156-315.71

시험 이름: CheckPoint (Check Point Certified Security Expert R71)

156-315.71 덤프무료샘플다운로드하기: http://www.itexamdump.com/156-315.71.html

NO.1 Which external user authentication protocols are supported in SSL VPN?
A. LDAP, Active Directory, SecurID
B. DAP, SecurID, Check Point Password, OS Password, RADIUS, TACACS
C. LDAP, RADIUS, Active Directory, SecurID
D. LDAP, RADIUS, TACACS, SecurID
Answer: B

CheckPoint   156-315.71   156-315.71인증

NO.2 Organizations are sometimes faced with the need to locate cluster members in different geographic
locations that are distant from each other. A typical example is replicated data centers whose location is
widely separated for disaster recovery purposes.
What are the restrictions of this solution?
A. There are no restrictions.
B. There is one restriction: The synchronization network must guarantee no more than 150 ms latency
(ITU Standard G.114).
C. There is one restriction: The synchronization network must guarantee no more than 100 ms latency.
D. There are two restrictions: 1. The synchronization network must guarantee no more than 100ms
latency and no more than 5% packet loss. 2. The synchronization network may only include switches and
hubs.
Answer: D

CheckPoint   156-315.71 dumps   156-315.71최신덤프   156-315.71

NO.3 What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setsync 0
B. fw ctl sysnstat stop
C. fw ctl sysnstat off
D. fw ctl setsyns off
Answer: D

CheckPoint   156-315.71   156-315.71덤프   156-315.71 dump

NO.4 What is a task of the SmartEvent Correlation Unit?
A. Add events to the events database.
B. Look for patterns according to the installed Event Policy.
C. Assign a severity level to an event
D. Display the received events.
Answer: B

CheckPoint자격증   156-315.71자격증   156-315.71자료   156-315.71인증   156-315.71

NO.5 John is configuring a new R71 Gateway cluster but he can not configure the cluster as Third Party IP
Clustering because this option is not available in Gateway Cluster Properties: What's happening?
A. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance B .Third
Party Clustering is not available for R71 Security Gateways.
B. ClusterXL needs to be unselected to permit 3rd party clustering configuration.
C. John has an invalid ClusterXL license.
Answer: C

CheckPoint pdf   156-315.71   156-315.71 pdf   156-315.71   156-315.71

NO.6 Which of the following commands can be used to stop Management portal services?
A. fw stopportal
B. cpportalstop
C. cpstop / portal
D. smartportalstop
Answer: D

CheckPoint   156-315.71시험문제   156-315.71   156-315.71

NO.7 When you check Web Server in a host-node object, what happens to the host?
A. The Web server daemon is enabled on the host.
B. More granular controls are added to the host, in addition to Web Intelligence tab settings.
C. You can specify allowed ports in the Web server's node-object properties. You then do not need to list
all allowed ports in the Rule Base.
D. IPS Web Intelligence is enabled to check on the host.
Answer: B

CheckPoint   156-315.71   156-315.71덤프   156-315.71   156-315.71인증

NO.8 You want to verify that your Check Point cluster is working correctly. Which command line tool can you
use?
A. cphaconf state
B. cphaprob state
C. cphainfo-s
D. cphastart -status
Answer: B

CheckPoint pdf   156-315.71최신덤프   156-315.71

NO.9 Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120
seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection
sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C

CheckPoint   156-315.71   156-315.71   156-315.71   156-315.71 dumps

NO.10 You are establishing a ClusterXL environment, with the following topology: External interfaces
192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same
VLAN switch. Internal interfaces 172.16 10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the
synchronization network. The Security Management Server is located on the internal network with IP
172.16.10.3. What is the problem with this configuration?
A. There is an IP address conflict
B. The Security Management Server must be in the dedicated synchronization network, not the internal
network.
C. The Cluster interface names must be identical across all cluster members.
D. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

CheckPoint자료   156-315.71   156-315.71   156-315.71

NO.11 You are MegaCorp Security Administrator. This company uses a firewall cluster, consisting of two
cluster members. The cluster generally works well but one day you find that the cluster is behaving
strangely. You assume that there is a connectivity problem with the cluster synchronization cluster link
(cross-over cable).
Which of the following commands is the best for testing the connectivity of the crossover cable?
A. telnet <IP address of the synchronization interface on the other cluster member>
B. arping <IP address of the synchronization interface on the other cluster member>
C. ifconfig a
D. Ping <IP address of the synchronization interface on the other cluster member>
Answer: B

CheckPoint시험문제   156-315.71최신덤프   156-315.71   156-315.71 dump

NO.12 Which procedure creates a new administrator in SmartWorkflow?
A. Run cpconfig, supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
B. In SmartDashboard, click SmartWorkflow / Enable SmartWorkflow and the Enable SmartWorkflow
wizard will start. Supply the Login Name, Profile Properties, Name, Access Applications and Permissions
when prompted.
C. On the Provider-1 primary MDS, run cpconfig, supply the Login Name, Profile Properties, Name,
Access Applications and Permissions.
D. In SmartDashboard, click Users and Administrators right click Administrators / New Administrator and
supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
Answer: D

CheckPoint시험문제   156-315.71자격증   156-315.71

NO.13 Which of the following is NOT a feature of ClusterXL?
A. Enhanced throughput in all ClusterXL modes (2 gateway cluster compared with 1 gateway)
B. Transparent failover in case of device failures
C. Zero downtime for mission-critical environments with State Synchronization
D. Transparent upgrades
Answer: C

CheckPoint덤프   156-315.71자료   156-315.71   156-315.71덤프   156-315.71

NO.14 ________is a proprietary Check Point protocol. it is the basis for Check Point ClusterXL inter-module
communication.
A. RDP
B. CCP
C. CKPP
D. HA OPCODE
Answer: B

CheckPoint시험문제   156-315.71   156-315.71 pdf   156-315.71

NO.15 Check point Clustering protocol, works on:
A. UDP 8116
B. UDP 500
C. TCP 8116
D. TCP 19864
Answer: A

CheckPoint   156-315.71 dump   156-315.71   156-315.71시험문제

NO.16 Which of the following manages Standard Reports and allows the administrator to specify automatic
uploads of reports to a central FTP server?
A. Smart Dashboard Log Consolidator
B. Security Management Server
C. Smart Reporter Database
D. Smart Reporter
Answer: D

CheckPoint인증   156-315.71   156-315.71   156-315.71   156-315.71

NO.17 Refer to Exhibit:
Match the ClusterXL Modes with their configurations
A. A-3, B-2, C-1, D-4
B. A-3, B-2, C-4, D-1
C. A-2, B-3, C-4, D-1
D. A-2, B-3, C-1, D-4
Answer: C

CheckPoint   156-315.71   156-315.71인증   156-315.71

NO.18 You need to publish SecurePlatform routes using the ospf routing protocol. What is the correct
command structure, once entering the route command, to implement ospf successfully?
A. Run cpconfig utility to enable ospf routing
B. ip route ospf
ospf network1
ospf network2
C. Enable
Configure terminal
Router ospf [id]
Network [network] [wildmask] area [id]
D. Use DBedit utility to either the objects_5_0.c file
Answer: C

CheckPoint덤프   156-315.71 dump   156-315.71   156-315.71 dumps   156-315.71자료

NO.19 Control connections between the Security Management Server and the Gateway are not encrypted by
the VPN Community. How are these connections secured?
A. They are encrypted and authenticated using SIC.
B. They are not encrypted, but are authenticated by the Gateway
C. They are secured by PPTP
D. They are not secured.
Answer: D

CheckPoint dumps   156-315.71덤프   156-315.71   156-315.71   156-315.71 pdf

NO.20 How does a cluster member take over the VIP after a failover event?
A. Ping the sync interface
B. if list -renew
C. Broadcast storm
D. Gratuitous ARP
Answer: D

CheckPoint   156-315.71   156-315.71자료   156-315.71 dump   156-315.71   156-315.71

CheckPoint인증156-315.71시험덤프공부자료는ITExamDump제품으로 가시면 자격증취득이 쉬워집니다. ITExamDump에서 출시한 CheckPoint인증156-315.71덤프는 이미 사용한 분들에게 많은 호평을 받아왔습니다. 시험적중율 최고에 많은 공부가 되었다고 희소식을 전해올때마다 ITExamDump는 더욱 완벽한CheckPoint인증156-315.71시험덤프공부자료로 수정하고기 위해 최선을 다해왔습니다. 최고품질으CheckPoint인증156-315.71덤프공부자료는ITExamDump에서만 찾아볼수 있습니다.